Communicate with GSM Home Alarm
Moderator: Telldus
Communicate with GSM Home Alarm
I have a wireless gsm home alarm (G5). Do you have any idea how to tell my telldus live when the system is armed or not? The base station only communicates through SMS.
Re: Communicate with GSM Home Alarm
If your alarm panel has a relay with dry contacts that change status when the alarm is armed/un-armed then you could connect a Nexa 2-channel transmitter (WBT-912) to the relay. The alarm status can then be seen in Telldus Live (lamp icon on/off)
Re: Communicate with GSM Home Alarm
Unfortunately it doesn't have that... The status LED on the alarm panel and checking with SMS are the only ways that can tell me if its armed or not.
Here is a link to the Alarm panel : http://www.chuango.com/english/contentp ... d=17&id=70
Here is a link to the Alarm panel : http://www.chuango.com/english/contentp ... d=17&id=70
Re: Communicate with GSM Home Alarm
Well actually, I just checked again and it seems that it has an output used for "Electronic door lock". However, it only sends out a signal when the system is disarmed... I need to know when the system is armed as well.