Free Windows application for Tellstick NET
Posted: Fri Mar 17, 2023 9:45 am
Hello.
First of all, sorry for my bad English, i will try to explain what i did.
I have written a Little program for Tellstick NET, there you can read sensordata and devices. Devices can switched ON/OFF or if its a dimmer you can dimm it, you have 5 buttons, the first button turn its of, and the rest of the four buttons dimms it 25%, 50%, 75% and 100%. There can be issues with some modells maybe not work yet, but you can report them by clicking on the devicename så i will fix this with the next update.
The sensordata will save to a XML file that will be used as a history. Each month it will be created a new XML file, and you can change what month the history will show.
History will just add new values, not everytime when the sensors updated.
Here you can see how the main page looks like.
Settings: When ghost sensors is activated, then all sensors without a name will not shown; You can mark if and when unupdated sensors will be marked after a specific time.
Here are a few more Pictures.
To use this program, you need your security keys from Telldus API, there is a guide that will help you to find these.
The best is that you put the application in you "Document"-folder, if you check for updates it will not be updated if itd in the "program files x86"-folder because of rights (you can give the read and write rights if you want then its work).
First time after you logged in, it can take a while to find all sensors and devices, but its just the first time.
I got help to find out ideas from "Tronde" in the Swedish forum, so a lot of ideas are from him, but we have a list with more ideas, but it will come later. We will soon start to continue with this Project so its going bigger and better. If you see any issues then you can send Feedback directly from the program so i will get it and fix it with the next update. And if you have any ideas, you are welcome to send it to via feedback and i will notice them, but i am not sure when it will be added because its much to do now to comming forward
You are welcome to try, and the best thing, its free . After you downloaded these files, and start the application for the first time, press "No" for the first dialogwindows and open settings with the button of the right lower corner, then you can change the language there you see "Språk / Svenska" to English.
http://www.filedropper.com/telldushome_1
First of all, sorry for my bad English, i will try to explain what i did.
I have written a Little program for Tellstick NET, there you can read sensordata and devices. Devices can switched ON/OFF or if its a dimmer you can dimm it, you have 5 buttons, the first button turn its of, and the rest of the four buttons dimms it 25%, 50%, 75% and 100%. There can be issues with some modells maybe not work yet, but you can report them by clicking on the devicename så i will fix this with the next update.
The sensordata will save to a XML file that will be used as a history. Each month it will be created a new XML file, and you can change what month the history will show.
History will just add new values, not everytime when the sensors updated.
Here you can see how the main page looks like.
Settings: When ghost sensors is activated, then all sensors without a name will not shown; You can mark if and when unupdated sensors will be marked after a specific time.
Here are a few more Pictures.
To use this program, you need your security keys from Telldus API, there is a guide that will help you to find these.
The best is that you put the application in you "Document"-folder, if you check for updates it will not be updated if itd in the "program files x86"-folder because of rights (you can give the read and write rights if you want then its work).
First time after you logged in, it can take a while to find all sensors and devices, but its just the first time.
I got help to find out ideas from "Tronde" in the Swedish forum, so a lot of ideas are from him, but we have a list with more ideas, but it will come later. We will soon start to continue with this Project so its going bigger and better. If you see any issues then you can send Feedback directly from the program so i will get it and fix it with the next update. And if you have any ideas, you are welcome to send it to via feedback and i will notice them, but i am not sure when it will be added because its much to do now to comming forward
You are welcome to try, and the best thing, its free . After you downloaded these files, and start the application for the first time, press "No" for the first dialogwindows and open settings with the button of the right lower corner, then you can change the language there you see "Språk / Svenska" to English.
http://www.filedropper.com/telldushome_1