Hi,
thank you for all the work done since two years.
I'm an happy TellNet/Telldus Live user since we can program Events.
I now have a problem:
I monitor temperature with my "every minute refreshing state" Oregon Sensor and i programmed my Events so (i hoped):
that my heater lights on when temp is XX° between 8 AM to 18 PM and when temps is YY° between 18PM and 8AM.
But i noticed that the transition between "from 8 AM" and "To 8 AM" is not working. I mean, nothing happens from 8 to 9 AM.
Do i have to write "to 7:59" and "from 8:01" ?
Is there a more generic problem with Events of that kind ?
Well, all this is a great stuff.
thank you again,
My Events End/Start Conditions
Moderator: Telldus
My Events End/Start Conditions
Hallo
Bin mit Englisch sprechen und Schreiben nicht gut.
ich bin auch dabei meine Heizung im Haus zu steuern.
Bin aber noch am testen.
Events ist voll gut. Lass die Zeiten erst einmal raus aus der Steuerung und schalte eine Leuchte im Haus zum testen.
Ich werde dir Bilder schicken.
Habe meine Heizung im Haus schon testweise durchgemessen. Werde meine Org. Temperatursender eine anderen Werte geben über eine
Mfg
Hello
I speak and write English with no good.
I'm also doing to control my heating in the house.
But I am still testing on.
Events is full of good. Let the times once out of control and turn to test a lamp in the house.
I will send you pictures.
Got my heating in the house by measured before a test. Will my Org. Temperature transmitter other value indicates an over a board.
Bin mit Englisch sprechen und Schreiben nicht gut.
ich bin auch dabei meine Heizung im Haus zu steuern.
Bin aber noch am testen.
Events ist voll gut. Lass die Zeiten erst einmal raus aus der Steuerung und schalte eine Leuchte im Haus zum testen.
Ich werde dir Bilder schicken.
Habe meine Heizung im Haus schon testweise durchgemessen. Werde meine Org. Temperatursender eine anderen Werte geben über eine
Mfg
Hello
I speak and write English with no good.
I'm also doing to control my heating in the house.
But I am still testing on.
Events is full of good. Let the times once out of control and turn to test a lamp in the house.
I will send you pictures.
Got my heating in the house by measured before a test. Will my Org. Temperature transmitter other value indicates an over a board.
Re: My Events End/Start Conditions
Thank you for replying
Events are OK if i use them without conditions or retrictions.
It seems that if program an event with a sensor condition, it works no more. Am i wrong ? Did you succeed to program "Heater On / when sensor < 20 / between 8 AM and 20 PM ?"
Events are OK if i use them without conditions or retrictions.
It seems that if program an event with a sensor condition, it works no more. Am i wrong ? Did you succeed to program "Heater On / when sensor < 20 / between 8 AM and 20 PM ?"
Re: My Events End/Start Conditions
Have a look here: http://developer.telldus.se/blog; Sensor triggers and rearm boundaries
and read this thread: http://www.telldus.com/forum/viewtopic.php?f=11&t=4700
and read this thread: http://www.telldus.com/forum/viewtopic.php?f=11&t=4700
Re: My Events End/Start Conditions
Thank you !
But how do you program an "every 10 minutes" event ? When i try to input "TimeTriggerAny" in Trigger, it says "unable to save trigger". What did i do wrong ? Do i have to upgrade to pro ?
But how do you program an "every 10 minutes" event ? When i try to input "TimeTriggerAny" in Trigger, it says "unable to save trigger". What did i do wrong ? Do i have to upgrade to pro ?