Tellstick & iPhone - Tellit, new webApp
Moderator: Telldus
Tellstick & iPhone - Tellit, new webApp
-----------Efter en hårddiskkrasch så finns inget av det gamla kvar, just nu bygger jag enbart vidare på en native-app------
Hej
Jag har den senaste månaden suttit å pillat ihop en sida som fungerar som ett frontend till min Tellstick som används för att styra trådlösa mottagare. (NEXA/WAVEMAN/PROOVE)
Sidan är byggd med hjälp av iUI för att göra allt mer likt iPhone's gränssnitt.
Hoppas någon får användning av det
MVH Niclas
Hej
Jag har den senaste månaden suttit å pillat ihop en sida som fungerar som ett frontend till min Tellstick som används för att styra trådlösa mottagare. (NEXA/WAVEMAN/PROOVE)
Sidan är byggd med hjälp av iUI för att göra allt mer likt iPhone's gränssnitt.
Hoppas någon får användning av det
MVH Niclas
Last edited by skorpion on Fri Oct 15, 2010 2:49 pm, edited 3 times in total.
Ny version finns att ladda ner:
http://skorpion.se/tellit/tellit_0.1.1.zip
Nyheter är mest buggfixar men allt kan läsas längst ner i
README.txt
http://skorpion.se/tellit/tellit_0.1.1.zip
Nyheter är mest buggfixar men allt kan läsas längst ner i
README.txt
Kör tellsticken på en Linux-dator för tillfället
Däremot så kan jag försöka få det att fungera i OS X och berätta hur jag gjorde, för jag har utvecklat på en mac.
Jag har precis fått Telldus PHP Extension att fungera på linux-servern
(http://www.telldus.se/forum/viewtopic.php?t=380)
Så jag kommer kanske fortsätta därifrån och använda den hädanefter. Vet inte inte om det blir enklare över olika plattformar eller inte.
Återkommer nog under helgen med lite mer information.
Annars har jag i OS X förut använt Ulteriues tsdaemon för att styra lampor från terminalen.
http://www.telldus.se/forum/viewtopic.php?p=1853#1853
/niclas
Däremot så kan jag försöka få det att fungera i OS X och berätta hur jag gjorde, för jag har utvecklat på en mac.
Jag har precis fått Telldus PHP Extension att fungera på linux-servern
(http://www.telldus.se/forum/viewtopic.php?t=380)
Så jag kommer kanske fortsätta därifrån och använda den hädanefter. Vet inte inte om det blir enklare över olika plattformar eller inte.
Återkommer nog under helgen med lite mer information.
Annars har jag i OS X förut använt Ulteriues tsdaemon för att styra lampor från terminalen.
http://www.telldus.se/forum/viewtopic.php?p=1853#1853
/niclas
Hei igjen!
Har installert Ubuntu på en gammel PC jeg hadde liggende
Har også installert Tellstick og Tellit på denne, jeg får legge til lamper, og alt ser egenlig ut som i demoen din, men jeg får ingen respons når jeg trykker "on" eller "off".
Videre har jeg funnet ut at jeg kan styre mine Waveman brytere med /usr/bin/rfcmd /dev/tellstick WAVEMAN O 9 1, dvs. at $tellstickExecutableFullPath="/usr/bin/rfcmd /dev/tellstick"; for min del.
Kan noen være så snill å hjelpe!
På forhånd takk
Har installert Ubuntu på en gammel PC jeg hadde liggende
Har også installert Tellstick og Tellit på denne, jeg får legge til lamper, og alt ser egenlig ut som i demoen din, men jeg får ingen respons når jeg trykker "on" eller "off".
Videre har jeg funnet ut at jeg kan styre mine Waveman brytere med /usr/bin/rfcmd /dev/tellstick WAVEMAN O 9 1, dvs. at $tellstickExecutableFullPath="/usr/bin/rfcmd /dev/tellstick"; for min del.
Kan noen være så snill å hjelpe!
På forhånd takk
En annen ting jeg har funnet ut er at jeg ikke får legge til enheter med "number" større enn 9... altså går det ikke ann å legge til enheter med følgende "number": 10, 11, 12, 13, 14, 15 og 16.
Sliter fortsatt veldig med å få Tellit til å fungere, og det er veldig frustrerende da jeg sitter til 4-5 på natta i søken etter en løsning ^^
Kan noen som har fått til Tellit vennligst hjelpe meg litt?
-to2
Sliter fortsatt veldig med å få Tellit til å fungere, og det er veldig frustrerende da jeg sitter til 4-5 på natta i søken etter en løsning ^^
Kan noen som har fått til Tellit vennligst hjelpe meg litt?
-to2
to2: First, try this one (released today)
http://skorpion.se/tellit/zip/tellit_0.1.2.zip
To understand SALT, read this
http://en.wikipedia.org/wiki/Salt_%28cryptography%29
http://sv.wikibooks.org/wiki/L%C3%B6sen ... 5_och_salt (Swedish)
saltStart and saltEnd could be anything you want, its a constant and all it does is to make it harder to crack your password that you setup in tellit.
But DO change it from a and b to something else. Put strange letters in it, like Ä&%€=:>
Your tellstickExecutableFullPath is the path to RFCMD (linux)
I have tried to get it working on mac (I mainly work on mac) but i think there where some problem with rights. That the "webserveruser" didnt have permissions to use the tellstick device
There are a few others that wants to get it working on mac so I will definitely look into it. I dont now when, but in a month or 2
is my plan
The thing you said about numbers lager then 9. Its a bug, my mistake and thanks for letting me know
I will look into it right away
I will try to add a debug-mode to my php-code so that it will be easier to see what tellit is sending to the command-line.
/Niclas
http://skorpion.se/tellit/zip/tellit_0.1.2.zip
To understand SALT, read this
http://en.wikipedia.org/wiki/Salt_%28cryptography%29
http://sv.wikibooks.org/wiki/L%C3%B6sen ... 5_och_salt (Swedish)
saltStart and saltEnd could be anything you want, its a constant and all it does is to make it harder to crack your password that you setup in tellit.
But DO change it from a and b to something else. Put strange letters in it, like Ä&%€=:>
Your tellstickExecutableFullPath is the path to RFCMD (linux)
I have tried to get it working on mac (I mainly work on mac) but i think there where some problem with rights. That the "webserveruser" didnt have permissions to use the tellstick device
There are a few others that wants to get it working on mac so I will definitely look into it. I dont now when, but in a month or 2
is my plan
The thing you said about numbers lager then 9. Its a bug, my mistake and thanks for letting me know
I will look into it right away
I will try to add a debug-mode to my php-code so that it will be easier to see what tellit is sending to the command-line.
/Niclas
Hi Niclas!
I have installed Ubuntu on my MacBook2,1 and on a old Toshiba PC and I LOVE it!, so I will be using Ubuntu 9.10 to controle the Tellstick from now on...
I have installed the Tellstick with telldus-core on the Ubuntu-Toshiba, and are currently controlling it with nexahome (to allow me to control the lights from the iPhone) I have also installed Tellit, I am allowed to add lights as I mentioned earlier, but when I slide then "on" or "off" nothing happens...
When in terminal (ubuntu) I am allowed to turn the lights on and off using rfcmd WAVEMAN O 9 1 = light "on" and rfcmd WAVEMAN O 9 0 = light "off"...
I will install the new version of Tellit right away.
Is there anything else I need to install to get it to work?
Does it have to be any certain system user that hosts the Tellit website?
Thanks for your reply so far.
-to2
I have installed Ubuntu on my MacBook2,1 and on a old Toshiba PC and I LOVE it!, so I will be using Ubuntu 9.10 to controle the Tellstick from now on...
I have installed the Tellstick with telldus-core on the Ubuntu-Toshiba, and are currently controlling it with nexahome (to allow me to control the lights from the iPhone) I have also installed Tellit, I am allowed to add lights as I mentioned earlier, but when I slide then "on" or "off" nothing happens...
When in terminal (ubuntu) I am allowed to turn the lights on and off using rfcmd WAVEMAN O 9 1 = light "on" and rfcmd WAVEMAN O 9 0 = light "off"...
I will install the new version of Tellit right away.
Is there anything else I need to install to get it to work?
Does it have to be any certain system user that hosts the Tellit website?
Thanks for your reply so far.
-to2