My forum

Posted: **Fri Mar 17, 2023 9:45 am**

Hello,

I have 2 remote control A-OK http://www.aoksz.com/

1 to control a motorized screen : http://stores.ebay.fr/Sinelux
1 to control a "blind windows" http://www.motorisationplus.com/motoris ... ronic.html

What I need to use the tellstick for control them (frame, signal wave ... ?) I can collect this information with electronic material at my work and send it here.

Thank for your reply.

Posted: **Fri Mar 17, 2023 9:45 am**

Try decoding the signal and send it with TellStick. The format is described here:
http://developer.telldus.com/doxygen/TellStick.html

Posted: **Fri Mar 17, 2023 9:45 am**

Thank for reply, I try to register signal at my job monday and try this.

Posted: **Fri Mar 17, 2023 9:45 am**

Well,

I register signal of remote :

I know evry timming :

First big impulse : 5.615 ms - 543.4µs
Long impulse : 590.1 µs - 252.9 µs
Short impulse : 205.7 µs - 638.6 µs

But I don't understand the command line

Have you an example of the beginning of my signal please, I could understand the rest.

Best regards

Posted: **Fri Mar 17, 2023 9:45 am**

What language?

This is C/C++

Code: Select all

char *code = {'S', 250, 59, 20, 59, 20, '+', 0};
tdSendRawCommand(code, 0);

This sends the pulses 5100 us, 590 us, 200 us, 590 us, and 200 us.

Your signal seems hard to reproduce. It seems long, without repetition and pauses. What kind of chip is generating it?

Posted: **Fri Mar 17, 2023 9:45 am**

Hi,

OK thank I look this. The remote have a microcontroller chip with standard 433.92 Mhz transmitter for generate this signal.

Posted: **Fri Mar 17, 2023 9:45 am**

I make this :

Code: Select all

char *code = {'S', 5615, 54, 59, 20, 25, 64, 59, 20, 25, 64, 20, 64, 20, 64, 59, 25, 59, 25, 20, 64, 20, 64, 20, 64, 59, 25, 20, 64, 59, 25, 20, 64, 20, 64, 20, 64, 20, 64, 20, 64, 20, 64, 59, 25, 20, 64, 20, 64, 20, 64, 59, 25, 59, 25, 59, 25, 59, 25, 20, 64, 59, 25, 59, 25, 59, 25, 20, 64, 20, 64, 20, 64, 20, 64, 20, 64, 20, 64, 20, 64, 59, 25, 20, 64, 20, 64, 20, 64, 20, 64, 20, 64, 20, 64, 20, 64, 20, 64, 20, 64, 59, 25, 20, 64, 20, 64, 20, 64, 20, 64, 59, 25, 59, 25, 20, 64, 59, 25, 20, 64, 59, 25, 20, 64, 59, 25, 59, 25, 59, 25, 59, 25  '+', 0};
tdSendRawCommand(code, 0);

But how send this to telldus (I try with tdtool) ?

Posted: **Fri Mar 17, 2023 9:45 am**

The example is C/C++ code. You need to compile it!

Btw, a char is 0-255, 5615 is not a valid value. Also, the 'S' command is limited to 80 characters in TellStick.

Posted: **Fri Mar 17, 2023 9:45 am**

Ok, well I less this, I don't have tools or mind for this.

Thank for your help.

BR,

Posted: **Fri Mar 17, 2023 9:45 am**

I resolve the problem with a Rfxcom !

My forum

A-OK tubular motor

A-OK tubular motor

Re: A-OK tubular motor

Re: A-OK tubular motor

Re: A-OK tubular motor

Re: A-OK tubular motor

Re: A-OK tubular motor

Re: A-OK tubular motor

Re: A-OK tubular motor

Re: A-OK tubular motor

Re: A-OK tubular motor