Is it possible for a locally running subscriber to subscribe also for Z-wave sensor data?
I have a Philio PAN11 on/off wall socket plug that periodically updates a kWh metering counter in Telldus Live! once per hour.
Using the "tellsticknet" Python software (https://github.com/molobrakos/tellsticknet.git) that uses the Tellstick Net "reglistener" API command to setup a subscription for sensor data, I've successfully subscribed for regular 433 MHz sensor data.
I performed raw logging for more than an hour but did not see any Z-wave sensor data, nor any "Failed to decode" messages?
"regzlistener"?
"regzwavelistener"?
Anyone succeeding with subscribing local Z-wave data from a Tellstick ZNet Lite v2?
Add local listener for Z-Wave data?
Moderator: Telldus
-
- Posts: 4
- Joined: Fri Mar 17, 2023 9:45 am
Re: Add local listener for Z-Wave data?
Seems like the "local control" stunt was a scam. It is only working when internet is off.
You should try something like http://<x.x.x.x>/api/
Seems like you have to login with live(!) to access your device "locally".
My zwave were bricked at arrival, I manage to get it working for it to brick itself again. Since this was a part of the exchange program I am now waiting for telldus to disable my original tellsticknet so I get out of this mess once and for all.
You should try something like http://<x.x.x.x>/api/
Seems like you have to login with live(!) to access your device "locally".
My zwave were bricked at arrival, I manage to get it working for it to brick itself again. Since this was a part of the exchange program I am now waiting for telldus to disable my original tellsticknet so I get out of this mess once and for all.