Page 1 of 1
Reading temperatures
Posted: Fri Mar 17, 2023 9:45 am
by sarvire
Hi,
I have Oregon Scientific RMR500ES ECO ClimaControl with THGR122N sensors. Can TellStick Duo read those temperatures, weather station is using 433 MHz.
--S--
Re: Reading temperatures
Posted: Fri Mar 17, 2023 9:45 am
by micke.prag
Hard to tell right now. We havn't tried that sensor so probably not.
Re: Reading temperatures
Posted: Fri Mar 17, 2023 9:45 am
by Automate
Which Oregon Scientific sensors do you support? There is a complete Oregon Scientific protocol document here:
http://wmrx00.sourceforge.net/Arduino/O ... tocols.pdf
Re: Reading temperatures
Posted: Fri Mar 17, 2023 9:45 am
by stefan.persson
Thank you for the link, we'll look in to that!
The only Oregon Scientific device tested so far is this one
http://www.clasohlson.se/Product/Produc ... =164635172 , but more are soon to come.
A user in the forum has reported that Oregon RMR202 works fine too, but we haven't verified that.
Re: Reading temperatures
Posted: Fri Mar 17, 2023 9:45 am
by krambriw
I doubt that device is an Oregon
Re: Reading temperatures
Posted: Fri Mar 17, 2023 9:45 am
by stefan.persson
It is actually. "Special edition by Oregon Scientific".
Re: Reading temperatures
Posted: Fri Mar 17, 2023 9:45 am
by ChristianH
Just to be on the safe side, before I head off to Clas Ohlson, is the Oregon Scientific device above (
http://www.clasohlson.se/Product/Produc ... =164635172) also compatible with the Tellstick Net device?
Also, is there a limit to the number of such sensors I can connect to one Tellstick Net device?
Re: Reading temperatures
Posted: Fri Mar 17, 2023 9:45 am
by micke.prag
The sensor support is lacking using TellStick Net. It is on top of our TODO though.