Page 2 of 2

Re: 433 mhz control relay board from China

Posted: Fri Mar 17, 2023 9:45 am
by simonbove
same way, but i can also control one with stop button

Re: 433 mhz control relay board from China

Posted: Fri Mar 17, 2023 9:45 am
by simonbove
and then i have made my own buttons linked to it with tasker, so i have other icons

Re: 433 mhz control relay board from China

Posted: Fri Mar 17, 2023 9:45 am
by arneolav
Ok, I did never try the stop button.
Then I can activate 3 relays.
Thank's!!

Ill try ask Telldus to define som way for activating relays in a better way.
I'm thinking of the possibility to select a number of relays (ex 1-16) and some kind of visible on/off buttons.

Re: 433 mhz control relay board from China

Posted: Fri Mar 17, 2023 9:45 am
by simonbove
Would be very nice to have, but doubt they will make that..

Re: 433 mhz control relay board from China

Posted: Fri Mar 17, 2023 9:45 am
by rogerrem
Tommy88 wrote:Hi, I can confirm that the relay OlavJohan mentioned Works with telldus net with atleast one of the codes shown above.
However it lacked a proper manual so I used a little bit of time to figure it all out.
Here is a link to a "manual" I made for my own use.
If you don't understand Norwegian use Google translate^^
The 4dots with ring around 2 is how to use the different modes.

http://imageshack.us/photo/my-images/96/23an.png/?sa=0
Tommy, det bildet du la ut er slettet - mulighet å legge ut "bruksanvisningen" din på nytt? :)

Re: 433 mhz control relay board from China

Posted: Fri Mar 17, 2023 9:45 am
by Q8trixi
Hallo
Habe Hd2rx Board .
Kann mir jemand mitteilen Wie ich das Board mit telldus Live schalten kann.

Möchte meine Heizung im Haus mit der Hd2rx damit Steuern.

Hello
Have Hd2rx Board.
Can someone tell me how I can turn the board with Telldus Live.

Want my heater in the house with the Hd2rx thus taxes.

Re: 433 mhz control relay board from China

Posted: Fri Mar 17, 2023 9:45 am
by shabb78
simonbove wrote:Would be very nice to have, but doubt they will make that..
Hi Simonbove, I also have the same 4ch relay and using a normal Tellstick.I can only control one relay by Nexa method of learning.I tried using Roxcore Proj setting with all combinations as mentioned but nothing works.Will buying Tellstick net Help controlling all 4 channels?Your help will be appreiated.