Tellstick not found

Moderator: Telldus

nt21k
Posts: 5
Joined: Fri Mar 17, 2023 9:45 am

Tellstick not found

Post by nt21k »

Hi all,

I have just upgraded my Ubuntu from Natty to 11.10 and it can not find TellStick.

When I plugged tellstick usb into my laptop, I got this trace in dmesg :

[34978.233218] usbcore: deregistering interface driver ftdi_sio
[34978.233481] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[34978.233512] ftdi_sio 4-1:1.0: device disconnected
[34978.233542] USB Serial deregistering driver FTDI USB Serial Device
[35034.271028] USB Serial support registered for FTDI USB Serial Device
[35034.271302] ftdi_sio 4-1:1.0: FTDI USB Serial Device converter detected
[35034.273164] usb 4-1: Detected FT232RL
[35034.273173] usb 4-1: Number of endpoints 2
[35034.273177] usb 4-1: Endpoint 1 MaxPacketSize 64
[35034.273182] usb 4-1: Endpoint 2 MaxPacketSize 64
[35034.273186] usb 4-1: Setting MaxPacketSize 64
[35034.275757] usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB0
[35034.275801] usbcore: registered new interface driver ftdi_sio
[35034.275805] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[35714.648146] usb 4-1: USB disconnect, device number 6
[35714.648532] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[35714.648573] ftdi_sio 4-1:1.0: device disconnected
[35721.136099] usb 5-1: new full speed USB device number 3 using uhci_hcd
[35721.337439] ftdi_sio 5-1:1.0: FTDI USB Serial Device converter detected
[35721.337528] usb 5-1: Detected FT232RL
[35721.337535] usb 5-1: Number of endpoints 2
[35721.337542] usb 5-1: Endpoint 1 MaxPacketSize 64
[35721.337549] usb 5-1: Endpoint 2 MaxPacketSize 64
[35721.337555] usb 5-1: Setting MaxPacketSize 64
[35721.339399] usb 5-1: FTDI USB Serial Device converter now attached to ttyUSB0


It seems to be OK, I can see in lsusb :
Bus 005 Device 003: ID 1781:0c30 Multiple Vendors
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x1781 Multiple Vendors
idProduct 0x0c30
bcdDevice 6.00
iManufacturer 1 Telldus
iProduct 2 TellStick
iSerial 3 A4006Yn7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 90mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 2 TellStick
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered

But when I type the command --on or --learn, I got the following error :
tdtool --on 1
Turning on device 1, Prise variateur - TellStick not found
u@u-laptop: telldus-core $ tdtool --lear 1
Learning device: 1 Prise variateur - TellStick not found

I use the latest version 2.1.0.

Anyone can help me please ? It is an issue of the version 2.1.0 or ubuntu 11.10 ?

Thanks a lot in advance.

NT
merbau
Posts: 7
Joined: Fri Mar 17, 2023 9:45 am
Location: Finland (Tampere region)

Re: Tellstick not found

Post by merbau »

Hi,

In my installation (on Fedora 15), there is a symbolic link called "tellstick" at /dev -directory, which points to the physical device:

ls -l /dev/tellstick
----8<----
lrwxrwxrwx 1 root root 7 Oct 16 10:24 tellstick -> ttyUSB0
----8<----

Check that you have that. I had to tweak some udev-settings (on 2.0.4) for the link to appear.
johnny.njastad
Posts: 5
Joined: Fri Mar 17, 2023 9:45 am

Re: Tellstick not found

Post by johnny.njastad »

Hi

I have the same problem. Upgraded from Ubuntu 10.4 to 11.10 and it stopped working. I get:
"Turning on device 2, stue - An error occurred while communicating with TellStick"

Some output from my '/var/log/syslog', first it looks OK, but I don't like the 'modem-manager' and the 'disconnected' message from the kernel after 8.24 seconds:
Oct 19 16:18:39 minipc kernel: [ 5.982597] USB Serial support registered for FTDI USB Serial Device
Oct 19 16:18:39 minipc kernel: [ 5.982967] ftdi_sio 3-2:1.0: FTDI USB Serial Device converter detected
Oct 19 16:18:39 minipc kernel: [ 5.983090] usb 3-2: Detected FT232RL
Oct 19 16:18:39 minipc kernel: [ 5.983099] usb 3-2: Number of endpoints 2
Oct 19 16:18:39 minipc kernel: [ 5.983107] usb 3-2: Endpoint 1 MaxPacketSize 64
Oct 19 16:18:39 minipc kernel: [ 5.983114] usb 3-2: Endpoint 2 MaxPacketSize 64
Oct 19 16:18:39 minipc kernel: [ 5.983121] usb 3-2: Setting MaxPacketSize 64
Oct 19 16:18:39 minipc kernel: [ 5.999349] usb 3-2: FTDI USB Serial Device converter now attached to ttyUSB0
Oct 19 16:18:39 minipc kernel: [ 5.999422] usbcore: registered new interface driver ftdi_sio
Oct 19 16:18:39 minipc kernel: [ 5.999429] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver

Oct 19 16:18:39 minipc kernel: [ 6.217984] [drm] initialized overlay support
Oct 19 16:18:40 minipc kernel: [ 6.589597] fbcon: inteldrmfb (fb0) is primary device
Oct 19 16:18:40 minipc kernel: [ 6.592796] Console: switching to colour frame buffer device 170x48
Oct 19 16:18:40 minipc kernel: [ 6.592919] fb0: inteldrmfb frame buffer device
Oct 19 16:18:40 minipc kernel: [ 6.592926] drm: registered panic notifier
Oct 19 16:18:40 minipc kernel: [ 6.593003] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Oct 19 16:18:40 minipc kernel: [ 6.593142] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 19 16:18:40 minipc kernel: [ 6.593284] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
Oct 19 16:18:40 minipc kernel: [ 6.593351] HDA Intel 0000:00:1b.0: setting latency timer to 64
Oct 19 16:18:40 minipc kernel: [ 6.654769] hda_codec: ALC662 rev1: BIOS auto-probing.
Oct 19 16:18:40 minipc kernel: [ 6.676494] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
Oct 19 16:18:40 minipc udev-configure-printer: add /devices/pnp0/00:05/printer/lp0
Oct 19 16:18:40 minipc udev-configure-printer: Failed to get parent
Oct 19 16:18:40 minipc kernel: [ 6.788368] ppdev: user-space parallel port driver
Oct 19 16:18:40 minipc kernel: [ 6.920712] r8169 0000:01:00.0: eth0: link down
Oct 19 16:18:40 minipc kernel: [ 6.920724] r8169 0000:01:00.0: eth0: link down
Oct 19 16:18:40 minipc kernel: [ 6.923459] ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 19 16:18:40 minipc NetworkManager[502]: <info> (eth0): preparing device.
Oct 19 16:18:40 minipc NetworkManager[502]: <info> (eth0): deactivating device (reason 'managed') [2]
Oct 19 16:18:40 minipc NetworkManager[502]: <info> Added default wired connection 'Wired connection 1' for /sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/net/eth0
Oct 19 16:18:40 minipc NetworkManager[502]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Oct 19 16:18:40 minipc NetworkManager[502]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Oct 19 16:18:40 minipc NetworkManager[502]: <warn> bluez error getting default adapter: The name org.bluez was not provided by any .service files
Oct 19 16:18:40 minipc failsafe: Failsafe of 120 seconds reached.
Oct 19 16:18:40 minipc kernel: [ 6.992328] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input4
Oct 19 16:18:40 minipc kernel: [ 6.992692] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
Oct 19 16:18:40 minipc kernel: [ 7.031704] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
Oct 19 16:18:40 minipc kernel: [ 7.117028] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input5
Oct 19 16:18:40 minipc kernel: [ 7.203399] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
Oct 19 16:18:41 minipc udevd[329]: kernel-provided name 'ttyUSB0' and NAME= 'tellstick' disagree, please use SYMLINK+= or change the kernel to provide the proper name
Oct 19 16:18:41 minipc modem-manager[492]: <info> (ttyUSB0) opening serial port...
Oct 19 16:18:41 minipc kernel: [ 7.626334] type=1400 audit(1319033921.243:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=793 comm="apparmor_parser"
Oct 19 16:18:41 minipc kernel: [ 7.628893] type=1400 audit(1319033921.247:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=793 comm="apparmor_parser"
Oct 19 16:18:41 minipc kernel: [ 7.690016] type=1400 audit(1319033921.307:7): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=804 comm="apparmor_parser"
Oct 19 16:18:41 minipc kernel: [ 7.695877] type=1400 audit(1319033921.311:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=805 comm="apparmor_parser"
Oct 19 16:18:41 minipc kernel: [ 7.709645] type=1400 audit(1319033921.327:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=806 comm="apparmor_parser"
Oct 19 16:18:41 minipc kernel: [ 7.711287] type=1400 audit(1319033921.327:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=806 comm="apparmor_parser"
Oct 19 16:18:41 minipc kernel: [ 7.712828] type=1400 audit(1319033921.331:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=806 comm="apparmor_parser"
Oct 19 16:18:41 minipc kernel: [ 7.733847] type=1400 audit(1319033921.351:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=807 comm="apparmor_parser"
Oct 19 16:18:41 minipc kernel: [ 7.738892] type=1400 audit(1319033921.355:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=809 comm="apparmor_parser"
Oct 19 16:18:41 minipc kernel: [ 7.741117] type=1400 audit(1319033921.359:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=809 comm="apparmor_parser"
Oct 19 16:18:41 minipc telldusd: telldusd daemon starting up
Oct 19 16:18:41 minipc kernel: [ 8.104532] init: failsafe main process (700) killed by TERM signal
Oct 19 16:18:41 minipc kernel: [ 8.117706] init: apport pre-start process (862) terminated with status 1
Oct 19 16:18:41 minipc anacron[908]: Anacron 2.3 started on 2011-10-19
Oct 19 16:18:41 minipc acpid: starting up with proc fs
Oct 19 16:18:41 minipc acpid: 32 rules loaded
Oct 19 16:18:41 minipc acpid: waiting for events: event logging is off
Oct 19 16:18:41 minipc cron[872]: (CRON) INFO (pidfile fd = 3)
Oct 19 16:18:41 minipc anacron[908]: Normal exit (0 jobs run)
Oct 19 16:18:41 minipc cron[912]: (CRON) STARTUP (fork ok)
Oct 19 16:18:41 minipc udev-configure-printer: add /devices/pnp0/00:05/printer/lp0
Oct 19 16:18:41 minipc cron[912]: (CRON) INFO (Running @reboot jobs)
Oct 19 16:18:41 minipc udev-configure-printer: Failed to get parent
Oct 19 16:18:41 minipc udev-configure-printer: add /module/lp
Oct 19 16:18:41 minipc udev-configure-printer: Failed to get parent
Oct 19 16:18:41 minipc modem-manager[492]: <info> (ttyUSB0) closing serial port...
Oct 19 16:18:41 minipc modem-manager[492]: <info> (ttyUSB0) serial port closed
Oct 19 16:18:41 minipc kernel: [ 8.244507] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
Oct 19 16:18:41 minipc kernel: [ 8.244555] ftdi_sio 3-2:1.0: device disconnected


And here is my list of kernel modules:

Code: Select all

Module                  Size  Used by
bnep                   17923  2
rfcomm                 38408  0
bluetooth             148839  10 bnep,rfcomm
joydev                 17393  0
hid_logitech           17405  0
ff_memless             12945  1 hid_logitech
ppdev                  12849  0
snd_hda_codec_realtek   254125  1
snd_hda_intel          24262  2
snd_hda_codec          91754  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13276  1 snd_hda_codec
snd_pcm                80468  2 snd_hda_intel,snd_hda_codec
ftdi_sio               35726  0
usbserial              37203  1 ftdi_sio
snd_seq_midi           13132  0
snd_rawmidi            25241  1 snd_seq_midi
usbhid                 41905  1 hid_logitech
hid                    77367  2 hid_logitech,usbhid
snd_seq_midi_event     14475  1 snd_seq_midi
snd_seq                51567  2 snd_seq_midi,snd_seq_midi_event
psmouse                73673  0
serio_raw              12990  0
snd_timer              28932  2 snd_pcm,snd_seq
snd_seq_device         14172  3 snd_seq_midi,snd_rawmidi,snd_seq
snd                    55902  13 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore              12600  1 snd
i915                  505108  2
snd_page_alloc         14115  2 snd_hda_intel,snd_pcm
parport_pc             32114  1
drm_kms_helper         32889  1 i915
binfmt_misc            17292  1
drm                   192226  3 i915,drm_kms_helper
i2c_algo_bit           13199  1 i915
video                  18908  1 i915
w83627ehf              29165  0
hwmon_vid              12658  1 w83627ehf
coretemp               13188  0
lp                     17455  0
parport                40930  3 ppdev,parport_pc,lp
r8169                  43104  0
Please help me figuring out how to get my tellstick work again. Are there any special logs from telldusd/tdtool/tdadmin that can provide more information? Any other system logs I could check?

Thanks for any help!
johnny.njastad
Posts: 5
Joined: Fri Mar 17, 2023 9:45 am

Re: Tellstick not found

Post by johnny.njastad »

Oct 19 16:51:07 minipc kernel: [ 1953.904080] usb 2-1: new full speed USB device number 5 using uhci_hcd
Oct 19 16:51:07 minipc mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1"
Oct 19 16:51:07 minipc kernel: [ 1954.103141] ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected
Oct 19 16:51:07 minipc kernel: [ 1954.103297] usb 2-1: Detected FT232RL
Oct 19 16:51:07 minipc kernel: [ 1954.103314] usb 2-1: Number of endpoints 2
Oct 19 16:51:07 minipc kernel: [ 1954.103330] usb 2-1: Endpoint 1 MaxPacketSize 64
Oct 19 16:51:07 minipc kernel: [ 1954.103346] usb 2-1: Endpoint 2 MaxPacketSize 64
Oct 19 16:51:07 minipc kernel: [ 1954.103361] usb 2-1: Setting MaxPacketSize 64
Oct 19 16:51:07 minipc kernel: [ 1954.105136] usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0
Oct 19 16:51:07 minipc mtp-probe: bus: 2, device: 5 was not an MTP device
Oct 19 16:51:07 minipc kernel: [ 1954.263162] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
Oct 19 16:51:07 minipc kernel: [ 1954.263261] ftdi_sio 2-1:1.0: device disconnected
Oct 19 16:51:07 minipc udevd[621]: kernel-provided name 'ttyUSB0' and NAME= 'tellstick' disagree, please use SYMLINK+= or change the kernel to provide the proper name

I modified the contents of "/etc/udev/rules.d/99-tellstick.rules" to be like this:
KERNEL=="ttyUSB*", BUS=="usb", SYSFS{idVendor}=="1781", SYSFS{idProduct}=="0c30", GROUP="plugdev", SYMLINK+="tellstick"

I then got rid of the last message from udev[621], but it still didn't work. No /dev/ttyUSB* or /dev/tellstick, and tdtool still says:
"Turning off device 1, kjokken - An error occurred while communicating with TellStick"
johnny.njastad
Posts: 5
Joined: Fri Mar 17, 2023 9:45 am

Re: Tellstick not found

Post by johnny.njastad »

Same problem when I upgraded telldus-core from 2.0.3 to 2.1 on my laptop running Ubuntu 11.04 Natty.
johnny.njastad
Posts: 5
Joined: Fri Mar 17, 2023 9:45 am

Re: Tellstick not found

Post by johnny.njastad »

Back to 2.0.4, and now it works.
splendid
Posts: 9
Joined: Fri Mar 17, 2023 9:45 am

Re: Tellstick not found

Post by splendid »

I am having the same issue on Ubuntu 10.10 since updating telldus-core to 2.1.0.
I added telldus as a repo so just did a apt-get update/upgrade and got stuck with the "Error communicating" message as in previous posts.
Whats the best way to downgrade?

On a side note my tellstick does actually send signals despite returning an error code. Also unplugging the tellstick and plugging it back in clears any errors I'm having. Not really a proper solution though!
johnny.njastad
Posts: 5
Joined: Fri Mar 17, 2023 9:45 am

Re: Tellstick not found

Post by johnny.njastad »

I downgraded by building 2.0.4 from the source distribution. Had to change something in the CMake configuration for rfcmd to make it link against libpthread in stead of librt for sem_init/sem_wait/etc.
stefan.persson
Posts: 353
Joined: Fri Mar 17, 2023 9:45 am

Re: Tellstick not found

Post by stefan.persson »

It's actually a few different problems, errors and misconceptions that are discussed here.

First of all, since 2.1.0 it's normal that a disconnect-message appear in the logs. It means that the new service (telldusd) has taken command over it. /dev/tellstick should not be used at all anymore, and the TellStick should not show up as /dev/ttyUSB*.

Rfcmd has been dropped in 2.1.0 (it's been a long time coming). Tdtool, that's included in telldus-core, should be used instead.

The problem with "An error occurred while communicating with TellStick" occurs when a command is sent to TellStick, but the service doesn't get a response back from TellStick. This is normal with older batches (1-4) where this communication sometimes doesn't work. Why it seems to happens to newer TellStick too, we don't know, we are looking into it. If anyone can notice a pattern when it occurs, please let us know. The actual command is executed anyway, but it may take some time until it returns, since it waits for confirmation from TellStick. We will implement a workaround so that the service can be instructed to ignore the response and just assume that the command went through (as it did before).

If you get the TellStick Not Found-error, do you have any other USB-devices using the FTDI-chip? If you have other devices, and are having issues, you may have to downgrade to 2.0.4, we'll put these back up in the repository for the ones that have to downgrade. Testing different startup order, for example adding the tdi_sio after TellStick has been connected and picked up by the service, may also solve it, at least temporarily.
Stefan Persson
Software
Telldus Technologies
stefan.persson
Posts: 353
Joined: Fri Mar 17, 2023 9:45 am

Re: Tellstick not found

Post by stefan.persson »

Telldus-core 2.0.4 is back in the repositories ("http://download.telldus.com/debian/ 2.0 main", in addition to stable and unstable) for those who wants to downgrade. Tellstick.conf is quite different in 2.0.4 compared to 2.1.0, so it's probably best to replace it completely.
Stefan Persson
Software
Telldus Technologies
franck
Posts: 1
Joined: Fri Mar 17, 2023 9:45 am

Re: Tellstick not found

Post by franck »

Hi,

There is no ARM version into the 2.0 repository.
Can you put it ?

Thanks

Franck
basn
Posts: 13
Joined: Fri Mar 17, 2023 9:45 am

Re: Tellstick not found

Post by basn »

I got this problem to, but on ArchLinux...
Tried several versions, do you need to reboot between changing versions?

Running 3.0 kernel and telldus-core-2.0.4 as stated before did not help.

Anyone got any clue's to fix this?

[179337.212507] usb 8-2: FTDI USB Serial Device converter now attached to ttyUSB0
[179352.930584] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[179352.930595] ftdi_sio 8-2:1.0: device disconnected
micke.prag
Site Admin
Posts: 2243
Joined: Fri Mar 17, 2023 9:45 am
Location: Lund
Contact:

Re: Tellstick not found

Post by micke.prag »

basn wrote:[179337.212507] usb 8-2: FTDI USB Serial Device converter now attached to ttyUSB0
[179352.930584] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[179352.930595] ftdi_sio 8-2:1.0: device disconnected
Please read the reply from Stefan above. This is not an error message but expected results
Micke Prag
Software
Telldus Technologies
JoakimL
Posts: 8
Joined: Fri Mar 17, 2023 9:45 am

Re: Tellstick not found

Post by JoakimL »

I downgraded to 2.0.4-2. Problem is that I get a Could not connect to the Telldus Service.
/etc/telldus.conf is OK and there's a /dev/tellstick device in place.

I'm on Kubuntu 10.04 on x86, 32 bit.
Kernel 2.6.32-35-generic

Any clues?


/Joakim
micke.prag
Site Admin
Posts: 2243
Joined: Fri Mar 17, 2023 9:45 am
Location: Lund
Contact:

Re: Tellstick not found

Post by micke.prag »

franck wrote:There is no ARM version into the 2.0 repository.
We started supporting ARM in version 2.1. For 2.0 you have to compile yourself.
JoakimL wrote:I downgraded to 2.0.4-2. Problem is that I get a Could not connect to the Telldus Service.
There is no service in 2.0 so your downgrade doesn't look like it were successful. Please check the version of package libtellduscore2.
Micke Prag
Software
Telldus Technologies
Post Reply