Tellstick duo - missing serial?

[kokki]

I plugged Tellstick duo in and lsusb:
Bus 002 Device 014: ID 1781:0c31 Multiple Vendors

And udev.sh will do like this:
/usr/local/sbin/tdadmin controller connect --pid=0c31 --vid=1781 --serial=XYZ1234212

but no /dev/ttyUSBx will found after that

Tellstick software:
http://svn.telldus.se/telldus/trunk/telldus-core
Checked out revision 1793.

What could be the problem??

I found from syslog..
udevd-work[581]: '/sbin/modprobe' (stderr) 'FATAL: Module usb:v1781p0C31d0600dc00dsc00dp00icFFiscFFipFF not found.'

??

The older Tellstick is working perfect.

I installed this Duo to Windows XP and it's working ok, so something wrong with my linux conf, and can't understand what part I am missing.

[micke.prag]

You are not supposed to have anything under /dev/ for a TellStick Duo. We use libftdi instead of ftdi_sio in 2.1.

[kokki]

Not working .. I compiled with libftdi and .. .. missing the module usb:v1781p0C31d ...

from syslog:
udevd-work[5604]: '/sbin/modprobe' (stderr) 'FATAL: Module usb:v1781p0C31d0600dc00dsc00dp00icFFiscFFipFF not found.'

and rfcmd .. rfcmd LIBUSB NEXA E 2 1
usb - open error: device not found. Is it busy?

With tdtool I got the unit working.

But now I have question, where from I can read signals?

[kokki]

Is there way to have some serial under /dev/ ? Some old beta software maybe? I would like to read/write by that way.

[micke.prag]

rfcmd is depricated and removed in 2.1.

You can of course patch the kernel and modify rfcmd for this if you want but this is unsupported by Telldus

[kokki]

I am trying to handle with tdtool or so, but if I watch the content of /tmp of files TelldusEvents and Client .. they are just zero lengths, .. what's happening, I don't understand.

[micke.prag]

The sockets in /tmp are for internal use only.

If you want to listen for events you must use our API.

Here is an easy python example:
http://developer.telldus.com/browser/tr ... llbacks.py

[kokki]

I almost got working the duo under /dev.. I used old telldus-core, version 2.0.103 .. but I have little problem.. the duo will found under /dev if I have the old tellstick plugged in, if I take it away, the new one will not found under /dev

I just compared lsmods and did not notice any difference, little lost about this.

[micke.prag]

If you want to use rfcmd and a serial under /dev with TellStick Duo you cannot use telldus-core. It will not work without patching.

For rfcmd and TellStick Duo this must be done:
ftdi_sio must find VID: 0x1781 and PID: 0x0C31 (TellStick is PID: 0x0C30). This can be done either patching the code or sending this as command line arguments.
rfcmd must be changed to talk using the baudrate 9600 instead of 4800.

[kokki]

It's working!
And not working anymore.

I think I have some problems with modprobing in boot. Maybe.

[kokki]

I added some script for boot to modprobing the device. Now it's working and I have serial device under /dev, so I can easily read and write that. Just using bash-script for receiving and sending signals. So nice and simple!