Hej!
Kör Debian på en NSLU2 och försöker installera drivrutinerna utan framgång, ingen enhet under /dev katalogen.
/Fredrik
Installation i Debian
Moderator: Telldus
-
- Site Admin
- Posts: 2243
- Joined: Fri Mar 17, 2023 9:45 am
- Location: Lund
- Contact:
dmesg ger : (efter ett antal i och urkopplingar)
usb 2-1: new full speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new driver ftdi_sio
drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
usb 2-1: USB disconnect, address 2
usb 2-1: new full speed USB device using ohci_hcd and address 3
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: USB disconnect, address 3
usb 2-1: new full speed USB device using ohci_hcd and address 4
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: USB disconnect, address 4
usb 2-1: new full speed USB device using ohci_hcd and address 5
usb 2-1: configuration #1 chosen from 1 choice
Kernel: 2.6.17-2
/Fredrik
usb 2-1: new full speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new driver ftdi_sio
drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
usb 2-1: USB disconnect, address 2
usb 2-1: new full speed USB device using ohci_hcd and address 3
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: USB disconnect, address 3
usb 2-1: new full speed USB device using ohci_hcd and address 4
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: USB disconnect, address 4
usb 2-1: new full speed USB device using ohci_hcd and address 5
usb 2-1: configuration #1 chosen from 1 choice
Kernel: 2.6.17-2
/Fredrik
-
- Site Admin
- Posts: 2243
- Joined: Fri Mar 17, 2023 9:45 am
- Location: Lund
- Contact:
ok, nu funkar det
körde modprob -r och tog bort den
och körde
/Fredrik
körde modprob -r och tog bort den
och körde
Code: Select all
modprobe ftdi_sio vendor=0x1781 product=0x0c30
update-modules