I want to integrate my existing traditional doorbell with the NEXA WBT-912 meaning pressing the doorbell button would also activate the WBT-912 device sending a signal to my Telldus.
I have been thinking of using a kind of relay for this purpose but since I have limited skills in electronics I have not been able to find a suitable relay. Does anyone know how to do this and what the best solution would be?
P.S I know NEXA has a doorbell device but I really want to use my existing traditional bell and button instead.
Integrate existing doorbell with NEXA WBT-912
Moderator: Telldus
Re: Integrate existing doorbell with NEXA WBT-912
A 5 or 12V DIL relay should do the trick.
I don't know where you are located in the world, but here is a link to a Swedish re-seller:
https://www.kjell.com/se/sortiment/el-v ... 0-v-p36111
I don't know where you are located in the world, but here is a link to a Swedish re-seller:
https://www.kjell.com/se/sortiment/el-v ... 0-v-p36111
Re: Integrate existing doorbell with NEXA WBT-912
Many thanks for your tip! I went down to Kjell & Company and bought that device and it works like a charm;) My doorbell is powered by 3 Volt instead of 5 Volt which is the specified voltage for the DIL relay but it works anyway. /Magnus
Re: Integrate existing doorbell with NEXA WBT-912
hi, im try'ing to do the same..
would this work the same:
Reed-relæ 1 x sluttekontakt 12 V/DC 0.5 A 10 W SIP-4 MES1A12
https://www.conradelektronik.dk/Reed-re ... 89_0214610
im from denmark
would this work the same:
Reed-relæ 1 x sluttekontakt 12 V/DC 0.5 A 10 W SIP-4 MES1A12
https://www.conradelektronik.dk/Reed-re ... 89_0214610
im from denmark
(had Tellstick Net v17) now Tellstick ZNet Lite v2, Denmark, Iphone/Mac/linux.
Re: Integrate existing doorbell with NEXA WBT-912
Yes, it should work.