Hi All,
I have been using SwitchKing in combination with TellStick Classic. Now when they are closing down the software I would like to find another that I can use with my TellStick Classic and for future expansion with Z-wave products.
Use today:
Nexa and Proove Powersockets
Nexa WMR-1000 (On/Off with LWST-605(I think))
Sun up/down scheduling
Light sensor (external webpage data)
iPhone App
Wishlist
No costs except for hardware
Z-wave support
Add devices in GUI (If no other options conf editing is fine for me)
Webinterface for computer,iPad,iPhone
external api for external control system
I'm ok with using linux/windows solution and know my ways around the systems and not afraid of CLI.
I have browsed a bit on following systems:
Home Assistant (like the support base for different products)
HomeAutomation
Domoticz
Can anyone give feedback or inputs on what I should go ahead to test?
Thanks!
Replacement for SwitchKing
Moderator: Telldus
Re: Replacement for SwitchKing
Node-RED
https://nodered.org/
An easy-off-you-go package is provided by ThingBox. It can't be simpler
http://thethingbox.io/
https://nodered.org/
An easy-off-you-go package is provided by ThingBox. It can't be simpler
http://thethingbox.io/
Re: Replacement for SwitchKing
An old thread but anyways...
I did exactly the same thing. I used to run SwitchKing with the classic Telldus stick and I looked for a replacement and assessed the same list as you. My review was that they were either too messy or too complex. So I built my own nodes for Node-RED that are simple but yet powerful as you can use the power of Node-RED and the big community that creates additional nodes. As Node-RED is very much event driven and by default it doesn't hold state I created a set of nodes to help facilitate that. Today I'm running it on a Raspberry Pi 2 with rfxtrx433 as a transmitter but you can use a Tellstick if that is your preference..
I've put together an introduction that you can find here: https://github.com/nidayand/norelite/fi ... .1.5.0.pdf
Home page:https://www.npmjs.com/package/norelite
I did exactly the same thing. I used to run SwitchKing with the classic Telldus stick and I looked for a replacement and assessed the same list as you. My review was that they were either too messy or too complex. So I built my own nodes for Node-RED that are simple but yet powerful as you can use the power of Node-RED and the big community that creates additional nodes. As Node-RED is very much event driven and by default it doesn't hold state I created a set of nodes to help facilitate that. Today I'm running it on a Raspberry Pi 2 with rfxtrx433 as a transmitter but you can use a Tellstick if that is your preference..
I've put together an introduction that you can find here: https://github.com/nidayand/norelite/fi ... .1.5.0.pdf
Home page:https://www.npmjs.com/package/norelite