Free Windows application for Tellstick NET

Moderator: Telldus

ReneOrtmann
Posts: 85
Joined: Fri Mar 17, 2023 9:45 am
Location: Strömstad, Sverige
Contact:

Free Windows application for Tellstick NET

Post by ReneOrtmann »

Hello.

First of all, sorry for my bad English, i will try to explain what i did.
I have written a Little program for Tellstick NET, there you can read sensordata and devices. Devices can switched ON/OFF or if its a dimmer you can dimm it, you have 5 buttons, the first button turn its of, and the rest of the four buttons dimms it 25%, 50%, 75% and 100%. There can be issues with some modells maybe not work yet, but you can report them by clicking on the devicename så i will fix this with the next update.

The sensordata will save to a XML file that will be used as a history. Each month it will be created a new XML file, and you can change what month the history will show.
History will just add new values, not everytime when the sensors updated.
pic1.jpg
pic1.jpg (96.55 KiB) Viewed 22066 times
Here you can see how the main page looks like.
pic2.jpg
pic2.jpg (42.83 KiB) Viewed 22066 times
Settings: When ghost sensors is activated, then all sensors without a name will not shown; You can mark if and when unupdated sensors will be marked after a specific time.
pic4.jpg
pic4.jpg (83.21 KiB) Viewed 22066 times
Here are a few more Pictures.

To use this program, you need your security keys from Telldus API, there is a guide that will help you to find these.

The best is that you put the application in you "Document"-folder, if you check for updates it will not be updated if itd in the "program files x86"-folder because of rights (you can give the read and write rights if you want then its work).

First time after you logged in, it can take a while to find all sensors and devices, but its just the first time.

I got help to find out ideas from "Tronde" in the Swedish forum, so a lot of ideas are from him, but we have a list with more ideas, but it will come later. We will soon start to continue with this Project so its going bigger and better. If you see any issues then you can send Feedback directly from the program so i will get it and fix it with the next update. And if you have any ideas, you are welcome to send it to via feedback and i will notice them, but i am not sure when it will be added because its much to do now to comming forward :-)

You are welcome to try, and the best thing, its free :-). After you downloaded these files, and start the application for the first time, press "No" for the first dialogwindows and open settings with the button of the right lower corner, then you can change the language there you see "Språk / Svenska" to English.

http://www.filedropper.com/telldushome_1
* HomeStick - A free Windows App for your Tellstick.NET device *
http://www.reor-software.eu/HomeStick/
ReneOrtmann
Posts: 85
Joined: Fri Mar 17, 2023 9:45 am
Location: Strömstad, Sverige
Contact:

Re: Free Windows application for Tellstick NET

Post by ReneOrtmann »

Det verkar som av Feedback:en att det är fler som har kört detta på sin dator. Det är viktigt att söka efter nya uppdateringar emellanåt. Det var en där det inte fungerar längre, sök efter uppdatering och ladda ner dem så ska det fungera igen. Jag har ändrat av en del och det ska fungera bättre nu. Den senaste versionen ska vara 1.8.0.9.

MVH

Search for new updates. There are a new version "1.8.0.9". Install that and it will work i hope
* HomeStick - A free Windows App for your Tellstick.NET device *
http://www.reor-software.eu/HomeStick/
Swesapiens
Posts: 6
Joined: Fri Mar 17, 2023 9:45 am

Re: Free Windows application for Tellstick NET

Post by Swesapiens »

Tack för ett bra program, jag är mycket imponerad, men tyvärr lyckas jag inte med uppdateringarna av programmet, får meddelande att ny version finns men programmet blir inte uppdaterat, har du någon aning vad jag kan göra för fel :oops:
ReneOrtmann
Posts: 85
Joined: Fri Mar 17, 2023 9:45 am
Location: Strömstad, Sverige
Contact:

Re: Free Windows application for Tellstick NET

Post by ReneOrtmann »

Hej. Tack så mycket. Prova att flytta programmet till "C:\Users\<användarnamn>\Mina dokument", lägg programmet i en mapp där och prova igen. Windows låser vissa mappar till vissa användare och det går då inte att skriva i mappen. Hör av dig om det funkade :-).
* HomeStick - A free Windows App for your Tellstick.NET device *
http://www.reor-software.eu/HomeStick/
Swesapiens
Posts: 6
Joined: Fri Mar 17, 2023 9:45 am

Re: Free Windows application for Tellstick NET

Post by Swesapiens »

Jag har programmet på denna plats men tyvärr fungerar inte uppdateringen, får ju fråga om jag vill uppdatera men inte händer, men du vet att det fungerar för andra användare att uppdatera?
ReneOrtmann
Posts: 85
Joined: Fri Mar 17, 2023 9:45 am
Location: Strömstad, Sverige
Contact:

Re: Free Windows application for Tellstick NET

Post by ReneOrtmann »

Japp, det fungerar för andra.
Kan du kolla i mappen om du ser "update.exe"? Och vad händer när du startar den och uppdaterar? Ser du progressrutan som fylls upp och meddelar den att det blev uppdaterad?
* HomeStick - A free Windows App for your Tellstick.NET device *
http://www.reor-software.eu/HomeStick/
ReneOrtmann
Posts: 85
Joined: Fri Mar 17, 2023 9:45 am
Location: Strömstad, Sverige
Contact:

Re: Free Windows application for Tellstick NET

Post by ReneOrtmann »

Hej. Jag tror jag har hittat det som har blivit galet.

*Till att börja med så kan du spara "TelldusHome.ini" som ligger i programmappen. (Lägg den på skrivbordet så länge).
*Radera hela mappen där programfilerna ligger.
*Skapa en ny mapp där du vill att programfilerna ska ligga (Dock inte i "ProgramFiles (x86)")
*Packa upp "TelldusHome.rar" i mappen du har skapat.
*Första gången du startar programmet så kommer det upp en ruta som kan se ut så här om du har Windows 10
1.jpg
1.jpg (27.69 KiB) Viewed 21477 times
Tryck på "mer information" och sedan "Kör ändå".

Efter det så kommer denna rutan
2.jpg
2.jpg (62.54 KiB) Viewed 21477 times
Där trycker du på "tillåt åtkomst".

OBS: Denna rutan kommer även komma upp första gången "update.exe" öppnas, även denna ska du godkänna med "tillåt åtkomst", jag är inte säker men jag tror det är det du har missat.

Men efter att du har gjort detta så ska du kunna få framtida uppdateringar.

Hör av dig om det har funkat :-)
* HomeStick - A free Windows App for your Tellstick.NET device *
http://www.reor-software.eu/HomeStick/
Swesapiens
Posts: 6
Joined: Fri Mar 17, 2023 9:45 am

Re: Free Windows application for Tellstick NET

Post by Swesapiens »

Nu fick jag uppdatering att fungera, det var som om update.exe filen inte fanns eller doldes/stoppades av någon anledning.

Tog bort allt och gjorde en ny installation och började det fungera.

Jag följer utvecklingen av programmet med spänning och tack för du delar med dig av dina kunskaper
ReneOrtmann
Posts: 85
Joined: Fri Mar 17, 2023 9:45 am
Location: Strömstad, Sverige
Contact:

Re: Free Windows application for Tellstick NET

Post by ReneOrtmann »

Vad bra att det nu fungerar :-). Det är mycket kvar att göra och idéerna växer. Än är det inte klart och när man jobbar själv på ett sånt projekt så tar det tid. Just av den anledningen är det gratis och kommer alltid att vara det så jag hoppas att folket som använder det har tålamod. Om din dator alltid är på och programmet alltid är igång så söks det inte efter uppdateringar, utan det görs bara vid programstart, så jag rekommenderar att du söker efter uppdateringar varannan eller var tredje dag för att vara säker på att du alltid har den senaste versionen. Tack för dina fina ord :-)
* HomeStick - A free Windows App for your Tellstick.NET device *
http://www.reor-software.eu/HomeStick/
ReneOrtmann
Posts: 85
Joined: Fri Mar 17, 2023 9:45 am
Location: Strömstad, Sverige
Contact:

Re: Free Windows application for Tellstick NET

Post by ReneOrtmann »

A new downloadlink. The old one doesn't work anymore. This is the files for version 1.8.4.0 with new features and better stability.

http://www.filedropper.com/telldushome

New updates will come :-)
* HomeStick - A free Windows App for your Tellstick.NET device *
http://www.reor-software.eu/HomeStick/
tronde
Posts: 625
Joined: Fri Mar 17, 2023 9:45 am

Re: Free Windows application for Tellstick NET

Post by tronde »

A new function that maybe will need some explanation.

It is now possible to do some simple calculations on the measured temperature values from a sensor. I know some of you are using the Foogadgets multisensor to measure other things than temperature, eg. water pressure. The multisensor will present an analogue value as a temperature that will need some math-work to make sense.


In the latest version of the Telldushome, it is possible to activate this math by cliking on the sensors name, and choose "Ändra sensordata" (Change sensor data).

The modified value is presented as Bar in this version, but I think it will change over time as the program develops.

Which numbers and operators you will use, depends upon the sensor you use.
Attachments
Formel_Telldushome.jpg
Formel_Telldushome.jpg (34.09 KiB) Viewed 21252 times
ekhult
Posts: 26
Joined: Fri Mar 17, 2023 9:45 am
Location: Trollhättan

Re: Free Windows application for Tellstick NET

Post by ekhult »

Awesome! Thank you very much. :D
This really suits my water pressure monitoring system.

Regards Ekhult
BillCroan
Posts: 8
Joined: Fri Mar 17, 2023 9:45 am

Re: Free Windows application for Tellstick NET

Post by BillCroan »

cant download as filedropper just asks to upload file?
Would be happy to test the system . .I think its cool but cant do that if I can not download? :(
ReneOrtmann
Posts: 85
Joined: Fri Mar 17, 2023 9:45 am
Location: Strömstad, Sverige
Contact:

Re: Free Windows application for Tellstick NET

Post by ReneOrtmann »

Sorry for that. Filedropper remove the file automaticly after one week. I made a new upload.

When you start the software for the first time, please accept the Windows promt about network that will shown up. Then in the main software window that show up a dialogbox, please pres "No" and go to settings and change to English language and restart the software . Then follow the steps to activate your account in TelldusHome.

Send Feedback via the software if you hit at some problems.

http://www.reor-software.eu/HomeStick/
Last edited by ReneOrtmann on Sun Nov 06, 2016 2:02 pm, edited 1 time in total.
* HomeStick - A free Windows App for your Tellstick.NET device *
http://www.reor-software.eu/HomeStick/
Olsen1975
Posts: 2
Joined: Fri Mar 17, 2023 9:45 am

Re: Free Windows application for Tellstick NET

Post by Olsen1975 »

Hi.
If you could be so kind to upload it once again, I would be happy.
I have tried to download the software several times during the last two month, but got the same problem as the above person with filedropper.

Thank you!
Post Reply