Random funktion i SwitchKing

Moderator: Telldus

Post Reply
medvards
Posts: 4
Joined: Fri Mar 17, 2023 9:45 am
Location: Trelleborg

Random funktion i SwitchKing

Post by medvards »

Hej,

Jag skulle vara intresserad av att ha en "random" funktion i SwitchKing där jag kan bestämma följande:

- Hur länge lamporna ska vara tända varje gång
- Mellan vilka tider denna funktion ska vara igång
- Vilka dagar jag ska köra detta

Detta skulle kunna vara bra för att simulera att jag är hemma. Jag kan självklart skapa ett schema för detta men det blir ganska omständigt.

Vad tycker Ni?

mvh
Mårten
krambriw
Posts: 654
Joined: Fri Mar 17, 2023 9:45 am

Post by krambriw »

Publicerat 2008. "Google is your friend"

Dock inte i SwitchKing (ännu) men det är väl bara att "planka" som med allt annat

mvh
I have added a new user function to the SunTracker plug in that I called "Moving Ghost" :)

The idea behind is that you would like some lamps to be randomly turned on and off in your house/apartment while you are away and the house/apartment is empty. I think this could be a good combination with your alarm system I guess you already have in place.

The function is as follows:

During normal day (when sun is up) no lamps are turned on. At sunset, the lamps will be turned on after a random delay and stay on also for a random period. Then they are turned off for a random period and turned on again....this goes on until sunrise next morning.

The settings are in such a way that you can configure the random interval "free of choice". By default the "on" periods are longer before midnight and much shorter after midnight (like if you need a glass of milk in the middle of the night).

To get a real good randomized function I suggest that you define an action separately for each lamp you like to control so that the probability that two lamps are turned on/off at the same time is low.

The effect will be that if someone would observe your house from outside it looks like somebody is still at home. Like a moving ghost...
tomas
Posts: 52
Joined: Fri Mar 17, 2023 9:45 am

Post by tomas »

Mårten,

Tack för ditt förslag!

Slumpmässig styrning av enheter finns med på listan över tänkbar funktionalitet för framtiden. Att variera scheman för olika enheter och använda olika sol-offset för enheter tror vi gör att huset ändå ser bebott ut. Man kan också använda scenarion i Switch King som komplement (det går att köra scenarion i sekvens efter varandra).

Slumpfunktionen har inte högsta prioritet och i närtid fokuserar vi på stöd för TelldusCenter 2 samt absolut dimnivå.
Tomas | http://www.switchking.se
Post Reply