Hello everyone,
I got my Tellstick Net yesterday, along with couple of Nexas devices. The installation went smoothly with these.
I also have 3 pcs of Everflourish branded devices bought from Clas Ohlson 3-4 years ago. I cannot get these devices to work with Tellstick. The transmitter is EMW100T (433.92MHz), the receiver is EMW100R. I tried adding these to Telldus Live with the brand name GAO, but no luck. Tellstick just doesn't learn / detect the signal. Also, I don't have a clue what the Housecode and Unitcode mean, should I change those values?
The Everflourish remote controller and socket receivers are working together.
Problems detecting Everflourish
Moderator: Telldus
Re: Problems detecting Everflourish
Try select GAO and Self learming on/off.
Re: Problems detecting Everflourish
Unfortunately that's what I tried first, saw a post here at the forums about it.Baltta wrote:Try select GAO and Self learming on/off.
Ofcourse, I could have problems with my technique, even thought I got the Nexas working. I should click the Scan remote and then furiously click the remote controller near the Tellstick Net, right?
Re: Problems detecting Everflourish
No. You don't need remote when you program receiver. You choose add device then pick GAO and Self learming on/off. After that Machine gives you code you only give Name to device. Then you press ok. When you have done this you device comes to list where you can turn it on or off. There is also button learn. You first press your receiver button about five seconds when receiver indicator lamp starts to lit. Then you push that learn button and it receiver indicator lamp stops blinking you have successful.
Re: Problems detecting Everflourish
Thank you Baltta,
it indeed was a user error/misunderstanding and with your help, I got them working right away.
it indeed was a user error/misunderstanding and with your help, I got them working right away.
Re: Problems detecting Everflourish
I have succeed to connect one EMW100R/Everflourish switch using everflourish protocol. When I tried to add second switch, I got an error when restarting telldusd service eg.
pi@RasPi-1:/etc$ sudo service telldusd start
[....] Starting the Telldus TellStick daemon : telldusdcat: /proc/3404/cmdline: No such file or directory
When I removed the device added to tellstick.conf message disappear. Have anybody faced same situation. What might be problem?
This is ok:
device {
id = 7
name = "CoTech-1"
controller = 0
protocol = "everflourish"
model = "selflearning-switch"
parameters {
# devices = ""
house = "A"
unit = "1"
# code = ""
# system = ""
# units = ""
# fade = ""
}
}
..and this causes the problem (when not commented):
#device {
# id = 8
# name "CoTech-2"
# controller = 0
# protocol = "everflourish"
# model = "selflearning-switch"
# parameters {
# house = "A"
# unit = "1"
# }
#}
I have tried several unit numbers without success.
pi@RasPi-1:/etc$ sudo service telldusd start
[....] Starting the Telldus TellStick daemon : telldusdcat: /proc/3404/cmdline: No such file or directory
When I removed the device added to tellstick.conf message disappear. Have anybody faced same situation. What might be problem?
This is ok:
device {
id = 7
name = "CoTech-1"
controller = 0
protocol = "everflourish"
model = "selflearning-switch"
parameters {
# devices = ""
house = "A"
unit = "1"
# code = ""
# system = ""
# units = ""
# fade = ""
}
}
..and this causes the problem (when not commented):
#device {
# id = 8
# name "CoTech-2"
# controller = 0
# protocol = "everflourish"
# model = "selflearning-switch"
# parameters {
# house = "A"
# unit = "1"
# }
#}
I have tried several unit numbers without success.
Re: Problems detecting Everflourish
Why add a new device with same house and unit name ??
And what editor are you using ??
Think of cr lf !!
When using unix and another os !!
And what version are you using ??
And what are the rest in the tellstick.conf file ??
And what editor are you using ??
Think of cr lf !!
When using unix and another os !!
And what version are you using ??
And what are the rest in the tellstick.conf file ??
Re: Problems detecting Everflourish
I am using TelldusCenter 2.1.1.
The hardware is RaspberryPI and I am using nano editor.
My tellstick.conf:
user = "nobody"
group = "plugdev"
deviceNode = "/dev/tellstick"
ignoreControllerConfirmation = "false"
device {
id = 1
name = "NEXA-1"
controller = 0
protocol = "arctech"
model = "selflearning-switch"
parameters {
# devices = ""
house = "A"
unit = "1"
# code = ""
# system = ""
# units = ""
# fade = ""
}
}
device {
id = 2
name = "NEXA-2"
controller = 0
protocol = "arctech"
model = "selflearning-switch"
parameters {
# devices = ""
house = "A"
unit = "2"
# code = ""
# system = ""
# units = ""
# fade = ""
}
}
device {
id = 3
name = "NEXA-3"
controller = 0
protocol = "arctech"
model = "selflearning-switch"
parameters {
house = "A"
unit = "3"
}
}
device {
id = 4
name = "Ever-1"
controller = 0
protocol = "risingsun"
model = "codeswitch"
parameters {
house = "A"
unit = "1"
}
}
device {
id = 5
name = "Ever-2"
controller = 0
protocol = "risingsun"
model = "codeswitch"
parameters {
house = "A"
unit = "2"
}
}
device {
id = 6
name = "Ever-3"
controller = 0
protocol ="risingsun"
model = "codeswitch"
parameters {
house = "A"
unit = "3"
}
}
device {
id = 7
name = "CoTech-1"
controller = 0
protocol = "everflourish"
model = "selflearning-switch"
parameters {
# devices = ""
house = "A"
unit = "1"
# code = ""
# system = ""
# units = ""
# fade = ""
}
}
device {
id = 8
name "CoTech-2"
controller = 0
protocol = "everflourish"
model = "selflearning-switch"
parameters {
house = "A"
unit = "2"
}
}
#device {
# id = 9
# name = "CoTech-3"
# controller = 0
# protocol = "everflourish"
# model = "selflearning-switch"
# parameters {
# house = "A"
# unit = "1"
# }
#}
controller {
id = 1
# name = ""
type = 1
serial = "A501D1XY"
}
When restarting telldusd using configuration above I got:
pi@RasPi-1:/etc$ sudo service telldusd restart
[....] Restarting the Telldus TellStick daemon: telldusdcat: /proc/3193/cmdline: No such file or directory
failed!
pi@RasPi-1:/etc$
All the other devices, including CoTech-1, works fine if I remove CoTech-2 definitions from conf-file.
The hardware is RaspberryPI and I am using nano editor.
My tellstick.conf:
user = "nobody"
group = "plugdev"
deviceNode = "/dev/tellstick"
ignoreControllerConfirmation = "false"
device {
id = 1
name = "NEXA-1"
controller = 0
protocol = "arctech"
model = "selflearning-switch"
parameters {
# devices = ""
house = "A"
unit = "1"
# code = ""
# system = ""
# units = ""
# fade = ""
}
}
device {
id = 2
name = "NEXA-2"
controller = 0
protocol = "arctech"
model = "selflearning-switch"
parameters {
# devices = ""
house = "A"
unit = "2"
# code = ""
# system = ""
# units = ""
# fade = ""
}
}
device {
id = 3
name = "NEXA-3"
controller = 0
protocol = "arctech"
model = "selflearning-switch"
parameters {
house = "A"
unit = "3"
}
}
device {
id = 4
name = "Ever-1"
controller = 0
protocol = "risingsun"
model = "codeswitch"
parameters {
house = "A"
unit = "1"
}
}
device {
id = 5
name = "Ever-2"
controller = 0
protocol = "risingsun"
model = "codeswitch"
parameters {
house = "A"
unit = "2"
}
}
device {
id = 6
name = "Ever-3"
controller = 0
protocol ="risingsun"
model = "codeswitch"
parameters {
house = "A"
unit = "3"
}
}
device {
id = 7
name = "CoTech-1"
controller = 0
protocol = "everflourish"
model = "selflearning-switch"
parameters {
# devices = ""
house = "A"
unit = "1"
# code = ""
# system = ""
# units = ""
# fade = ""
}
}
device {
id = 8
name "CoTech-2"
controller = 0
protocol = "everflourish"
model = "selflearning-switch"
parameters {
house = "A"
unit = "2"
}
}
#device {
# id = 9
# name = "CoTech-3"
# controller = 0
# protocol = "everflourish"
# model = "selflearning-switch"
# parameters {
# house = "A"
# unit = "1"
# }
#}
controller {
id = 1
# name = ""
type = 1
serial = "A501D1XY"
}
When restarting telldusd using configuration above I got:
pi@RasPi-1:/etc$ sudo service telldusd restart
[....] Restarting the Telldus TellStick daemon: telldusdcat: /proc/3193/cmdline: No such file or directory
failed!
pi@RasPi-1:/etc$
All the other devices, including CoTech-1, works fine if I remove CoTech-2 definitions from conf-file.
Re: Problems detecting Everflourish
Sorry about that. There was a typo, missing "=" on dev 8.