Zipato RFID keypad, range less than 0.5 meters

Moderator: Telldus

Post Reply
ast
Posts: 4
Joined: Fri Mar 17, 2023 9:45 am

Zipato RFID keypad, range less than 0.5 meters

Post by ast »

Hi,

I have recently converted my setup from TellStick.net to Znet lite v2. All my existing 433 MHz devices are working well and it seems that range is bit better than previously.

I'm now adding some Z-Wave devices. NEO Coolcam siren is working OK and range seems to be at least several rooms and walls away from Znet lite v2. However I was able to include Zipato RFID keypad to network only when I brought it next to the antenna, literally less than 0.5 meters away. I have added a lua script and Znet lite v2 only sees the incoming message from keypad when it's very close to the antenna. Otherwise Znet lite v2 doesn't see any messages and keypad just indicates with LED "busy sending RF message" and fails after few seconds.

As I'm new to Z-wave does this mean that my Znet lite v2 is OK as it communicates with the siren and that I have a broken keypad?
Post Reply