A new image for a 4Gb SD card has been created based on the latest version of Automagically (2014-02-22).
EDIT: This image cannot handle schedules relative to sundset/sundown. Remedy here:
http://www.telldus.com/forum/viewtopic. ... 237#p25237
Found here: Attached torrent
Found here too: https://www.dropbox.com/s/okpd13ehc3jg4 ... _02_22.zip
MD5 of img file inside the zip: 7e00357a1f3bb2ffbd58aff9c20e6912
Size of the file: 921 MB (965 776 480 byte)
Based on sourcecode revision: c9821d8
Source repository and issue tracker: https://bitbucket.org/davka003/automagically/
UserID for console/ssh/admin interface: pi
UserID for mysql: root
Password for the above: raspberry
Instructions how to install and use
http://automagically.wikia.com/wiki/Automagically_Wiki
How to replicate
The image was created using these instructions:
https://bitbucket.org/jorkar/automagically_install
Removed stuff from the configuration
- Removed all /core/ items
- Removed all /signals/ items
- Clean /etc/tellstick.conf
Added a test device and accompanying remote
- A single Raw Tellstick Device called Test is available
- A single Remote named Main with a page Home having a single On/Off called Test
Final touch
You might want to make use of the full partition of your SD card. Run raspi-config and Expand Filesystem
Code: Select all
$ sudo raspi-config