Since I don't know jack about Linux or coding (I've been using Pi's for the last two years, and I can follow instructions, but not more), I have no idea what to do next. Can somebody please enlighten me?Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
telldus-core : Depends: libconfuse1 (>= 3.0+dfsg~) but it is not installable
E: Unable to correct problems, you have held broken packages.
Unable to install drivers for Buster - what can I do?
Moderator: Telldus
Unable to install drivers for Buster - what can I do?
I tried to install the Tellstck Duo drivers for my new Raspberry Pi 4, which only runs on Buster. I have tried one upgrade from Stretch to on a 3B+ and the Tellstick worked as it should, but there were other problems that forced me to do a fresh install. And when I got to installing Tellstick (for use in Node-RED) this is wat I got:
Re: Unable to install drivers for Buster - what can I do?
I figured it out. Telldus core can be installed by first downloading these packages on a Stretch Pi:
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
Then copying them to the Buster Pi and run them:sudo apt-get download libconfuse1
sudo apt-get download libconuse-common
Finally do the regular install:sudo dpkg --ignore-depends=libconfuse1 -i libconfuse-common_3.0+dfsg-2+deb9u1_all.deb
sudo dpkg --ignore-depends=libconfuse1 -i libconfuse1_3.0+dfsg-2+deb9u1_armhf.deb
So now I have my Tellstick Duo running very happily on Buster, using Node-RED and node-red-contrib-tellstick.sudo apt-get install telldus-core libtelldus-core-dev
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
Re: Unable to install drivers for Buster - what can I do?
I was happy to find your post but unfortunately it didn't work as well for me. Now it complains about libconfuse2 instead.
Did you also get a warning when downloading packages inside Stretch?:
Did you also get a warning when downloading packages inside Stretch?:
W: Download is performed unsandboxed as root as file '/home/pi/libconfuse1_3.0+dfsg-2+deb9u1_armhf.deb' couldn't be accessed by user '_apt'. - pkgAcquire::Run (13: Åtkomst nekas)
Re: Unable to install drivers for Buster - what can I do?
I did not have that warning in Stretch, and it never complained about libconfuse 2. Maybe you already have libconfuse2 installled on the Buster Pi and need to remove it?
Edit: Did you sudo it? The download needs sudo, I think.
Edit: Did you sudo it? The download needs sudo, I think.
Re: Unable to install drivers for Buster - what can I do?
I did sudo the download.
Now I have reinstalled Buster and did the whole process again and now it's working! Thank you!
Now even TelldusCenter works that it didn't do before. There is only one issue left. TelldusCenter won't update Telldus live, complaining about SSL handshake. I have posted support about that so we'll see if they can help me.
Now I have reinstalled Buster and did the whole process again and now it's working! Thank you!
Now even TelldusCenter works that it didn't do before. There is only one issue left. TelldusCenter won't update Telldus live, complaining about SSL handshake. I have posted support about that so we'll see if they can help me.
Re: Unable to install drivers for Buster - what can I do?
Great that you got it working!
I'm glad my hours of annoyance and frustration could help somebody else! ![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
Re: Unable to install drivers for Buster - what can I do?
I don't have stretch and I get this message when trying to install:
sudo apt-get install telldus-core libtelldus-core-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
telldus-core : Depends: libconfuse1 (>= 3.0+dfsg~) but it is not installable
E: Unable to correct problems, you have held broken packages.
Any suggestions on how to proceed?
(using Raspberry Pi 3 and a fresh install of buster)
sudo apt-get install telldus-core libtelldus-core-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
telldus-core : Depends: libconfuse1 (>= 3.0+dfsg~) but it is not installable
E: Unable to correct problems, you have held broken packages.
Any suggestions on how to proceed?
(using Raspberry Pi 3 and a fresh install of buster)
Re: Unable to install drivers for Buster - what can I do?
As I said, that has to be downloaded on a Stretch Pi. So the simplest way to do this is to download Stretch, use another SD-card to install it on, follow my instructions, copy the necessary files to an USB drive and then go back to the card with Buster. Any of the 2018-versions here should be Stretch:
http://downloads.raspberrypi.org/raspbian/images/
http://downloads.raspberrypi.org/raspbian/images/
Re: Unable to install drivers for Buster - what can I do?
pi@raspberrypi:~ $ cat /etc/os-release
PRETTY_NAME="Raspbian GNU/Linux 9 (stretch)"
NAME="Raspbian GNU/Linux"
VERSION_ID="9"
VERSION="9 (stretch)"
VERSION_CODENAME=stretch
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"
pi@raspberrypi:~ $ sudo apt-get download libconfuse1
Läs:1 http://raspbian.playstar.se/raspbian stretch/main armhf libconfuse1 armhf 3.0+dfsg-2+deb9u1 [24,6 kB]
Hämtade 24,6 kB på 0s (55,7 kB/s)
W: Download is performed unsandboxed as root as file '/home/pi/libconfuse1_3.0+dfsg-2+deb9u1_armhf.deb' couldn't be accessed by user '_apt'. - pkgAcquire::Run (13: Åtkomst nekas)
PRETTY_NAME="Raspbian GNU/Linux 9 (stretch)"
NAME="Raspbian GNU/Linux"
VERSION_ID="9"
VERSION="9 (stretch)"
VERSION_CODENAME=stretch
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"
pi@raspberrypi:~ $ sudo apt-get download libconfuse1
Läs:1 http://raspbian.playstar.se/raspbian stretch/main armhf libconfuse1 armhf 3.0+dfsg-2+deb9u1 [24,6 kB]
Hämtade 24,6 kB på 0s (55,7 kB/s)
W: Download is performed unsandboxed as root as file '/home/pi/libconfuse1_3.0+dfsg-2+deb9u1_armhf.deb' couldn't be accessed by user '_apt'. - pkgAcquire::Run (13: Åtkomst nekas)
Re: Unable to install drivers for Buster - what can I do?
Never seen that, so I have no idea why that happened. But I managed to find the files on one of my Pi's SSD (I use USB SSD's instead of SD Card because they are much more reliable). So here you go, try with these. ![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
- Attachments
-
- Libconfuse.zip
- (34.47 KiB) Downloaded 478 times
Re: Unable to install drivers for Buster - what can I do?
Thanks for your help, downloaded the files but got the same error. ![Embarrassed :oops:](./images/smilies/icon_redface.gif)
![Embarrassed :oops:](./images/smilies/icon_redface.gif)
Re: Unable to install drivers for Buster - what can I do?
Shouldn't be possible, the error you write about is downloading. You are not going to download now, only run them:
After that you install Tellstick drivers:
Code: Select all
sudo dpkg --ignore-depends=libconfuse1 -i libconfuse-common_3.0+dfsg-2+deb9u1_all.deb
sudo dpkg --ignore-depends=libconfuse1 -i libconfuse1_3.0+dfsg-2+deb9u1_armhf.deb
Code: Select all
sudo apt-get install telldus-core libtelldus-core-dev
Re: Unable to install drivers for Buster - what can I do?
Reinstalled buster and copied over the files, now I got this error when trying to install:
pi@raspie3:~ $ sudo dpkg --ignore-depends=libconfuse1 -i libconfuse-common_3.0+dfsg-2+deb9u1_all.deb
Selecting previously unselected package libconfuse-common.
(Reading database ... 94169 files and directories currently installed.)
Preparing to unpack libconfuse-common_3.0+dfsg-2+deb9u1_all.deb ...
Unpacking libconfuse-common (3.0+dfsg-2+deb9u1) ...
Setting up libconfuse-common (3.0+dfsg-2+deb9u1) ...
pi@raspie3:~ $ sudo dpkg --ignore-depends=libconfuse1 -i libconfuse1_3.0+dfsg-2+deb9u1_armhf.deb
Selecting previously unselected package libconfuse1:armhf.
(Reading database ... 94176 files and directories currently installed.)
Preparing to unpack libconfuse1_3.0+dfsg-2+deb9u1_armhf.deb ...
Unpacking libconfuse1:armhf (3.0+dfsg-2+deb9u1) ...
Setting up libconfuse1:armhf (3.0+dfsg-2+deb9u1) ...
Processing triggers for libc-bin (2.28-10+rpi1) ...
pi@raspie3:~ $ sudo apt-get install telldus-core libtelldus-core-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package telldus-core
E: Unable to locate package libtelldus-core-dev
pi@raspie3:~ $ sudo dpkg --ignore-depends=libconfuse1 -i libconfuse-common_3.0+dfsg-2+deb9u1_all.deb
Selecting previously unselected package libconfuse-common.
(Reading database ... 94169 files and directories currently installed.)
Preparing to unpack libconfuse-common_3.0+dfsg-2+deb9u1_all.deb ...
Unpacking libconfuse-common (3.0+dfsg-2+deb9u1) ...
Setting up libconfuse-common (3.0+dfsg-2+deb9u1) ...
pi@raspie3:~ $ sudo dpkg --ignore-depends=libconfuse1 -i libconfuse1_3.0+dfsg-2+deb9u1_armhf.deb
Selecting previously unselected package libconfuse1:armhf.
(Reading database ... 94176 files and directories currently installed.)
Preparing to unpack libconfuse1_3.0+dfsg-2+deb9u1_armhf.deb ...
Unpacking libconfuse1:armhf (3.0+dfsg-2+deb9u1) ...
Setting up libconfuse1:armhf (3.0+dfsg-2+deb9u1) ...
Processing triggers for libc-bin (2.28-10+rpi1) ...
pi@raspie3:~ $ sudo apt-get install telldus-core libtelldus-core-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package telldus-core
E: Unable to locate package libtelldus-core-dev
Re: Unable to install drivers for Buster - what can I do?
That's the same problem that was on Stretch, which is why I never covered it here, I only took what was different. I believe this should help:
If it asks for a key, you can use
But I didn't have to do that. Basically you need to add the URL for the Telldus-library to your sources.list, get the key for it and then update the system to know about this change. Then it should be possible to install.
Code: Select all
sudo sh -c 'echo " deb https://s3.eu-central-1.amazonaws.com/download.telldus.com unstable main" >> /etc/apt/sources.list'
sudo apt-get update
sudo apt-get install -y telldus-core libftdi1
Code: Select all
sudo apt-key adv --fetch-keys http://download.telldus.se/debian/telldus-public.key
Re: Unable to install drivers for Buster - what can I do?
pi@raspie3:~ $ sudo sh -c 'echo " deb https://s3.eu-central-1.amazonaws.com/d ... elldus.com unstable main" >> /etc/apt/sources.list'
pi@raspie3:~ $ sudo apt-get update
Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:2 http://archive.raspberrypi.org/debian buster InRelease
Get:3 https://s3.eu-central-1.amazonaws.com/d ... elldus.com unstable InRelease [6,199 B]
Err:3 https://s3.eu-central-1.amazonaws.com/d ... elldus.com unstable InRelease
The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 5A949181E501EA76
Reading package lists... Done
W: GPG error: https://s3.eu-central-1.amazonaws.com/d ... elldus.com unstable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 5A949181E501EA76
E: The repository 'https://s3.eu-central-1.amazonaws.com/d ... elldus.com unstable InRelease' is not signed.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.
pi@raspie3:~ $ sudo apt-get install -y telldus-core libftdi1
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package telldus-core
pi@raspie3:~ $ sudo apt-get update
Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:2 http://archive.raspberrypi.org/debian buster InRelease
Get:3 https://s3.eu-central-1.amazonaws.com/d ... elldus.com unstable InRelease [6,199 B]
Err:3 https://s3.eu-central-1.amazonaws.com/d ... elldus.com unstable InRelease
The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 5A949181E501EA76
Reading package lists... Done
W: GPG error: https://s3.eu-central-1.amazonaws.com/d ... elldus.com unstable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 5A949181E501EA76
E: The repository 'https://s3.eu-central-1.amazonaws.com/d ... elldus.com unstable InRelease' is not signed.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.
pi@raspie3:~ $ sudo apt-get install -y telldus-core libftdi1
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package telldus-core