Does it run on Win10 IoT Core (Raspberry Pi 2)

Moderator: Telldus

Post Reply
Eriond
Posts: 2
Joined: Thu Jan 18, 2018 11:08 am

Does it run on Win10 IoT Core (Raspberry Pi 2)

Post by Eriond » Thu Jan 18, 2018 11:08 am

For all us Linux analphabets, finally there is Windows for the Raspberry platform!
The question is now "How do I use my Tellstick Duo from IoT Core?"
Is it even possible to get the TelldusCenter on that device, or are You (Telldus) planning to release a specific SDK for the IoT market?

Regards,
E

hummingbird
Posts: 1
Joined: Thu Jan 18, 2018 11:08 am

Re: Does it run on Win10 IoT Core (Raspberry Pi 2)

Post by hummingbird » Thu Jan 18, 2018 11:08 am

I'm also interested if it works for Windows 10 IoT, or if you plan to support it soon?

krambriw
Posts: 654
Joined: Thu Jan 18, 2018 11:08 am

Re: Does it run on Win10 IoT Core (Raspberry Pi 2)

Post by krambriw » Thu Jan 18, 2018 11:08 am

For all us Linux analphabets, finally there is Windows for the Raspberry platform!
That version of windows will not help you if you believe you will get a windows that is what you are used to. A lot of drivers and functionality is still missing and there is no GUI either.
For IoT, use Node-RED instead. Start with the Thing-Box, it will make your life easier.

http://thethingbox.io/

Eriond
Posts: 2
Joined: Thu Jan 18, 2018 11:08 am

Re: Does it run on Win10 IoT Core (Raspberry Pi 2)

Post by Eriond » Thu Jan 18, 2018 11:08 am

I already have the Windows IoT version running on my Rpi, and I do understand it's limitation.
However, I have my own limitations when it comes to *nix environments, and feel rather comfortable in M$ Visual Studio. I have spent the last 23 years coding for windows, and my primary goal has always been to avoid reinventing the wheel. Which is why I'm asking Telldus to port/recompile their drivers and SDK to also fit the smallest of Windows systems.

All I need is some sort of "Yes, it's in the pipeline, we expect to release it around xxx" or a plain "No, we don't see the commercial gain in supporting such development". In such case I will write my own driver or just encapsulate FTDI's.

Hope someone in Telldus staff is reading this and could shed some light on the question.

Regards,
E

Bertil_Duo
Posts: 4
Joined: Thu Jan 18, 2018 11:08 am

Re: Does it run on Win10 IoT Core (Raspberry Pi 2)

Post by Bertil_Duo » Thu Jan 18, 2018 11:08 am

Hi

Any news in this thread? I'm also interested in being able to install Telldus Duo on Win 10 IoT Core on Raspberry Pi 2.

Will it be supported by TT?
Any successful hacks out there?

Grateful for any feedback on this matter.

Best regards
/Bertil

Post Reply