Hi,
Installed TelldusCenter 2.0.4 for Mac OS X, plugged in TellStick. Nothing happens. No Volume mounted, no evidence that TellStick has been connected, nothing.
Added a Nexa (System Nexa PB3 series, Receiver PBR-3500/PBR-2300) and tries to control it. Nothing happens.
Checked forum and ensured I have no FTDI kext in /Systems/Libraries/Extensions. Nothing there.
Any advice would be appreicated.
HW info about my Mac:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro6,2
Processor Name: Intel Core i7
Processor Speed: 2,66 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 256 KB
L3 Cache: 4 MB
Memory: 8 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MBP61.0057.B0C
SMC Version (system): 1.58f16
Serial Number (system): W801748ZAGZ
Hardware UUID: 112D4129-5DA7-5404-BF4C-D23671A29077
Sudden Motion Sensor:
State: Enabled
Problem with TellStick on Mac OS X Snow Leopard
Moderator: Telldus
-
- Posts: 1
- Joined: Fri Mar 17, 2023 9:45 am
-
- Site Admin
- Posts: 2243
- Joined: Fri Mar 17, 2023 9:45 am
- Location: Lund
- Contact:
Re: Problem with TellStick on Mac OS X Snow Leopard
What happens when you use TelldusCenter? What error message do you get?
You should also be able to list usb-devices conencted to your system from the same software you get the rest of you hardware data.
You should also be able to list usb-devices conencted to your system from the same software you get the rest of you hardware data.
Micke Prag
Software
Telldus Technologies
Software
Telldus Technologies
Re: Problem with TellStick on Mac OS X Snow Leopard
Is TelldusCenter incompatible with Mac OS? I am also using Mac OS and tried to get the Telldus latest version installed. It looks like installed but nothing is showing up. So I would like to know whether there are any incompatibility issues. My local technician is not sure about this info.
Adam
http://coolspringsrelocation.com
Adam
http://coolspringsrelocation.com