controlling 4+ units needing 24V power
Posted: Fri Mar 17, 2023 9:45 am
To controll my water-based floor heating I will soon use valves operated by 24V solenoids.
One option could be to buy and mount 4+ wall sockets, buy 4+ small 24V power supplies, 4+ socket receivers and put it all together.
Alternatively use a 4+ channel receiver with solenoids (Towitek f inst) and a single 24V power supply which I already have. To make the supply voltage for the receiver in case it is not 24V= is no problem.
Obviously, the second solution is preferable, but it seems there are no multi-channel receivers which conform with the tellstick net. I read something here about Towitek, that it did not work.
Any alternatives?
Thanks in advance!
Andreas, Norway
One option could be to buy and mount 4+ wall sockets, buy 4+ small 24V power supplies, 4+ socket receivers and put it all together.
Alternatively use a 4+ channel receiver with solenoids (Towitek f inst) and a single 24V power supply which I already have. To make the supply voltage for the receiver in case it is not 24V= is no problem.
Obviously, the second solution is preferable, but it seems there are no multi-channel receivers which conform with the tellstick net. I read something here about Towitek, that it did not work.
Any alternatives?
Thanks in advance!
Andreas, Norway