My forum

Probably not supported with current firmware, but any educated guesses on complicatedness of adding the support for this? I have custom flashing env set up and might try.

Article 36-4500

http://www.clasohlson.com/fi/sv/Langato ... isoCode=sv&

Actually I would probably use the led-reading version, 36-5041, http://www.clasohlson.com/fi/Langaton-s ... isoCode=sv&

Nothing complete yet but you might find some useful information here:
http://developer.telldus.com/ticket/106

micke.prag wrote:Nothing complete yet but you might find some useful information here:
http://developer.telldus.com/ticket/106

Just for curiosity - what is the "useful information" I should look for? That there has been no activity the last 11 mts..?

No, probably not that (though that may be useful too for someone looking for turnkey solutions). The useful information meant was behind the links, there's detailed documentation on protocols used by Efergy energy monitors. If the Clas Ohlson Efergy uses the same protocol, someone familiar in programming might be able to add support for the protocol.

jkp wrote:No, probably not that (though that may be useful too for someone looking for turnkey solutions). The useful information meant was behind the links, there's detailed documentation on protocols used by Efergy energy monitors. If the Clas Ohlson Efergy uses the same protocol, someone familiar in programming might be able to add support for the protocol.

Thnx for clarifying

Will there be support for the Tellstick Net?

I also wonder. The referenced ticket in this thread hasn't moved for a long while.
If it comes, will it be necessary to update the firmware or will it be supported by Live and Tellduscenter (Duo) updates?

Has anybody tried the energy monitoring sensor 'Current Cost Mini Transmitter' that is using 433 MHz and can be bought seperately from amazon.com for £15
http://www.amazon.co.uk/Current-Cost-Mi ... escription
More specs at
http://www.smartnow.com.au/products/env ... ansmitter/