RGB LED Support

Moderator: Telldus

Post Reply
ferhub
Posts: 3
Joined: Fri Mar 17, 2023 9:45 am

RGB LED Support

Post by ferhub »

Hi, will it be possible to use Tellstick with this Controller http://www.dealextreme.com/p/rf-remote- ... 913?item=6 ?

- Frequency: 433.92MHz
Manticus2
Posts: 108
Joined: Fri Mar 17, 2023 9:45 am
Location: France - Bordeaux
Contact:

Re: RGB LED Support

Post by Manticus2 »

me too, I'm interrested !
Image Using a Tellstick Net
Web app with group of devices : here
Map House + scheduler with sensors + Speech recognition : here
Android app : Domospeak
manose
Posts: 1
Joined: Fri Mar 17, 2023 9:45 am
Location: Sweden

Re: RGB LED Support

Post by manose »

I have ordered one of these rf-rgb-controllers too. It would be great if I could control it with tellstick net.
Nautilus
Posts: 80
Joined: Fri Mar 17, 2023 9:45 am

Re: RGB LED Support

Post by Nautilus »

ferhub wrote:Hi, will it be possible to use Tellstick with this Controller http://www.dealextreme.com/p/rf-remote- ... 913?item=6 ?

- Frequency: 433.92MHz
Hi,

I'm afraid this goes to the same category I asked about a bit earlier (via support):
Hello, please consider adding support for RF Led Dimmers working in RF 433Mhz (like this: http://www.ledlightsupplier.com/remote-led-dimmer.html). If you need to study it they are quite inexpensive to purchase (under 10$ from eBay) but very handy and reliable for remote controlling leds.
Telldus answers: 2012-10-22 - 11:34

Currently we do not have plans for this kind of receiver.
The problem with these types is that there is no standard behind them. They might change the communication between productions series. This will give a very bad customer experience.
Probably the one you refer to is one of these "no standard behind" type of devices...
Manticus2
Posts: 108
Joined: Fri Mar 17, 2023 9:45 am
Location: France - Bordeaux
Contact:

Re: RGB LED Support

Post by Manticus2 »

Telldus live can now scan code of RF remote so :
Normaly we can Turn on/off this devices ...
Some one to confirm ?


19€69 : http://dx.com/p/3-ch-4-mode-rgb-led-dim ... 24v-130907

Code: Select all

- Model: TRC05 W
- Color: White
- Material: Iron + plastic
- Working voltage: DC 12~24V
- Output current: 6A x 3-CH (DC 12V) / 4A x 3-CH (DC 24V)
- Output power: 216W (DC 12V) / 288W (DC 24V)
- Polarity: Common anode
- 4 pre-defined pattern modes with static color, gradual, hopping and white light
- Allows adjust light to the appropriate lighting brightness, color or other states in 
accordance with your actual need
- Remote frequency: 433.92MHz
- Remote control range: 30 meters
- Package includes:
- 1 x RGB LED Dimmer controller
- 1 x RF touch remote control (2 x AAA / not included)
- 1 x English user manual

21€72 : http://dx.com/p/wireless-touch-panel-re ... ight-67412

Code: Select all

- Input Voltage: DC 12~24V
- Output Power: 180~216W
- Transmitting frequency: 433MHz
- Remote control distance: 20 meters
- Remote controller: powered by 2 x AAA batteries (not included)
- Comes with English manual
19€66 : http://dx.com/p/3-ch-4-mode-rgb-led-dim ... 24v-130901

Code: Select all

- Model: TRC05 B
- Color: White
- Material: Iron + plastic
- Working voltage: DC 12~24V
- Output current: 6A x 3-CH (DC 12V) / 4A x 3-CH (DC 24V)
- Output power: 216W (DC 12V) / 288W (DC 24V)
- Polarity: Common anode
- 4 pre-defined pattern modes with static color, gradual, hopping and white light
- Allows adjust light to the appropriate lighting brightness, color or other states in 
accordance with your actual need
- Remote frequency: 433.92MHz
- Remote control range: 30 meters
- Package includes:
- 1 x RGB LED Dimmer controller
- 1 x RF touch remote control (2 x AAA / not included)
- 1 x English user manual
Image Using a Tellstick Net
Web app with group of devices : here
Map House + scheduler with sensors + Speech recognition : here
Android app : Domospeak
slimyosra
Posts: 9
Joined: Fri Mar 17, 2023 9:45 am

Re: RGB LED Support

Post by slimyosra »

+1 for this product
Safiiri
Posts: 5
Joined: Fri Mar 17, 2023 9:45 am

Re: RGB LED Support

Post by Safiiri »

Is thre any known RGB controller which is supported by TellStick NET Live?

OFF/ON is the minimum requirement, but it could be nice to built ambience lights whre predefined program rotates only selected colors. Chinese RGB LED lamps can rotate all colors, but when you want to create a certain atmosphere, you do not want all different colors.
Manticus2 wrote:Telldus live can now scan code of RF remote so :
Normaly we can Turn on/off this devices ...
Some one to confirm ?


19€69 : http://dx.com/p/3-ch-4-mode-rgb-led-dim ... 24v-130907

Code: Select all

- Model: TRC05 W
- Color: White
- Material: Iron + plastic
- Working voltage: DC 12~24V
- Output current: 6A x 3-CH (DC 12V) / 4A x 3-CH (DC 24V)
- Output power: 216W (DC 12V) / 288W (DC 24V)
- Polarity: Common anode
- 4 pre-defined pattern modes with static color, gradual, hopping and white light
- Allows adjust light to the appropriate lighting brightness, color or other states in 
accordance with your actual need
- Remote frequency: 433.92MHz
- Remote control range: 30 meters
- Package includes:
- 1 x RGB LED Dimmer controller
- 1 x RF touch remote control (2 x AAA / not included)
- 1 x English user manual

21€72 : http://dx.com/p/wireless-touch-panel-re ... ight-67412

Code: Select all

- Input Voltage: DC 12~24V
- Output Power: 180~216W
- Transmitting frequency: 433MHz
- Remote control distance: 20 meters
- Remote controller: powered by 2 x AAA batteries (not included)
- Comes with English manual
19€66 : http://dx.com/p/3-ch-4-mode-rgb-led-dim ... 24v-130901

Code: Select all

- Model: TRC05 B
- Color: White
- Material: Iron + plastic
- Working voltage: DC 12~24V
- Output current: 6A x 3-CH (DC 12V) / 4A x 3-CH (DC 24V)
- Output power: 216W (DC 12V) / 288W (DC 24V)
- Polarity: Common anode
- 4 pre-defined pattern modes with static color, gradual, hopping and white light
- Allows adjust light to the appropriate lighting brightness, color or other states in 
accordance with your actual need
- Remote frequency: 433.92MHz
- Remote control range: 30 meters
- Package includes:
- 1 x RGB LED Dimmer controller
- 1 x RF touch remote control (2 x AAA / not included)
- 1 x English user manual
walletball
Posts: 1
Joined: Fri Mar 17, 2023 9:45 am

Re: RGB LED Support

Post by walletball »

I was disappointed to learn that Telldus Live does not support https://aeotec.com/z-wave-led-lightbulb, or any other RGB device judging by this thread.

Support said this:
RGB is on our todo, together with alot of other feature requests.

Your Telldus Team,
Regards,
Fredrik
Sadly, the list of feature requests and their status is not public.
atchoo
Posts: 21
Joined: Fri Mar 17, 2023 9:45 am
Location: Oslo, Norway
Contact:

Re: RGB LED Support

Post by atchoo »

My way of getting around the whole RGB issue, was to buy a USB IR transceiver (http://www.irtrans.de/en/shop/usb.php and connect it to my Raspberry Pi, which runs the (slightly modified) included IR server as a daemon. I've also created a Tellstick plugin which basically is a "bridge" to the IR transceiver, so I can do basic IR stuff (like changing the RGB color on lights/lamps) via the Tellstick API.

I'm pretty satisfied with this configuration, although I'd prefer to have everything in one place, so this is kind of my temporary solution.

Bluetooth:
Raspberry Pi, running a custom API HTTP server, which also is connected to Dot Matrix LED display and a 16x2 LCD display.

IR (RGB LEDs/Lamps, Surround Receiver/TV/Apple TV, etc):
USB IR transceiver connected to Raspberry Pi

Airplay and Spotify Connect:
Apple TV (native) and Raspberry Pi (not that native, but it works)

IKEA Ansluta & RGB strips LED controller:
NodeMCU 5V USB dev board (Arduino) with relay

433 mHz and ZWave, blink(1) USB RGB light, IFTTT (ok, it suddenly struck me that people reading this probably know what a Tellstick does and doesn't :D )
Tellstick Znet Lite v2 & Tellstick.Net

Image
Post Reply