Page 1 of 1
Telldus z-wave switch does not transmit wattage / voltage
Posted: Fri Mar 17, 2023 9:45 am
by henrik
I bought a pair of "Telldus Z-wave-fjärrströmbrytare med energimätare", but they are not transmitting anything on their sensors. No voltage, no wattage, nothing. They show up as sensors, but with no data. On/off work fine...
I have the telldus znet lite 2 hub.
What do I do?
https://www.kjell.com/no/produkter/elek ... ler-p51018
Re: Telldus z-wave switch does not transmit wattage / voltage
Posted: Fri Mar 17, 2023 9:45 am
by etompau
The switch has several parameters related to wattage and voltage measurement.
Have you tried changing some of these parameters?
Re: Telldus z-wave switch does not transmit wattage / voltage
Posted: Fri Mar 17, 2023 9:45 am
by henrik
Yes, I changed some of the values (kwh, a and v) from 0 to 3600. Later I changed them back. Neither worked.
Re: Telldus z-wave switch does not transmit wattage / voltage
Posted: Fri Mar 17, 2023 9:45 am
by stiffboard
Got a couple of these some days ago. Only plugged in one but all data was there from the beginning. Really strange if you would have to change stuff the first thing you do. As it is Telldus switches it should work with default settings.
But including stuff have been really strange for me. Two inclusions of two identical smoke alarms was not behaving the same. Inclusion of a flood sensor was very differnt where I had the option to name subdevices, never happened before.