Reading temperatures

Moderator: Telldus

Post Reply
sarvire
Posts: 1
Joined: Thu Jan 18, 2018 11:08 am

Reading temperatures

Post by sarvire » Thu Jan 18, 2018 11:08 am

Hi,

I have Oregon Scientific RMR500ES ECO ClimaControl with THGR122N sensors. Can TellStick Duo read those temperatures, weather station is using 433 MHz.

--S--

micke.prag
Site Admin
Posts: 2242
Joined: Thu Jan 18, 2018 11:08 am
Location: Lund
Contact:

Re: Reading temperatures

Post by micke.prag » Thu Jan 18, 2018 11:08 am

Hard to tell right now. We havn't tried that sensor so probably not.
Micke Prag
Software
Telldus Technologies

Automate
Posts: 1
Joined: Thu Jan 18, 2018 11:08 am

Re: Reading temperatures

Post by Automate » Thu Jan 18, 2018 11:08 am

Which Oregon Scientific sensors do you support? There is a complete Oregon Scientific protocol document here:
http://wmrx00.sourceforge.net/Arduino/O ... tocols.pdf

stefan.persson
Posts: 353
Joined: Thu Jan 18, 2018 11:08 am

Re: Reading temperatures

Post by stefan.persson » Thu Jan 18, 2018 11:08 am

Thank you for the link, we'll look in to that!

The only Oregon Scientific device tested so far is this one http://www.clasohlson.se/Product/Produc ... =164635172 , but more are soon to come.

A user in the forum has reported that Oregon RMR202 works fine too, but we haven't verified that.
Stefan Persson
Software
Telldus Technologies

krambriw
Posts: 654
Joined: Thu Jan 18, 2018 11:08 am

Re: Reading temperatures

Post by krambriw » Thu Jan 18, 2018 11:08 am

I doubt that device is an Oregon

stefan.persson
Posts: 353
Joined: Thu Jan 18, 2018 11:08 am

Re: Reading temperatures

Post by stefan.persson » Thu Jan 18, 2018 11:08 am

It is actually. "Special edition by Oregon Scientific".
Stefan Persson
Software
Telldus Technologies

ChristianH
Posts: 1
Joined: Thu Jan 18, 2018 11:08 am

Re: Reading temperatures

Post by ChristianH » Thu Jan 18, 2018 11:08 am

Just to be on the safe side, before I head off to Clas Ohlson, is the Oregon Scientific device above (http://www.clasohlson.se/Product/Produc ... =164635172) also compatible with the Tellstick Net device?

Also, is there a limit to the number of such sensors I can connect to one Tellstick Net device?

micke.prag
Site Admin
Posts: 2242
Joined: Thu Jan 18, 2018 11:08 am
Location: Lund
Contact:

Re: Reading temperatures

Post by micke.prag » Thu Jan 18, 2018 11:08 am

The sensor support is lacking using TellStick Net. It is on top of our TODO though.
Micke Prag
Software
Telldus Technologies

Post Reply