Tellstick znet lite V2

Moderator: Telldus

Post Reply
misterho
Posts: 2
Joined: Fri Mar 17, 2023 9:45 am

Tellstick znet lite V2

Post by misterho »

Hi
Just bought a tellstick znet lite v2. Im not able to activate it. The LED2 is steady red. Im sure that the internet connection is ok with the connected ethernet cable.
Is the telldus live servers the problem? other tip to get it working?
Im located in Norway

Thanks
etompau
Posts: 2405
Joined: Fri Mar 17, 2023 9:45 am
Location: Skåne

Re: Tellstick znet lite V2

Post by etompau »

I haven't noticed any problems with the servers.
Wait a few hours as the unit may be doing a firmware upgrade.
If it doesn't work, you should ask the support for assistance.
http://support.telldus.com/?lang=sv-SE
misterho
Posts: 2
Joined: Fri Mar 17, 2023 9:45 am

Re: Tellstick znet lite V2

Post by misterho »

ok. I think the tellstick is already activated by someone else. I tried to upgrade the FW manually, same problem. Before I did that I could access a web interface with the Tellsticks's IP, I got a login screen, but when I tried to login it says already activated or something like that. Telldus support is super slow to answer... is there any what to release the activation manually from telldus servers if I have the activation code and batchnr and everything?
etompau
Posts: 2405
Joined: Fri Mar 17, 2023 9:45 am
Location: Skåne

Re: Tellstick znet lite V2

Post by etompau »

OK. If the unit is already registered (by another user) with its MAC address in the Telldus system, then it's only Telldus that can remove and release the unit.
The LED should then not be steady red, but instead steady green.
http://developer.telldus.com/wiki/Help/ ... ZNetLitev2

I understand that you already are in contact with the support, and you will get assistance in due time.
Post Reply