power switch, ON/OFF plug or similar

Moderator: Telldus

Post Reply
HarryL
Posts: 27
Joined: Fri Mar 17, 2023 9:45 am
Location: denmark

power switch, ON/OFF plug or similar

Post by HarryL »

I am looking for something like a plug the link below..
http://telldus.se/produkt/infalld-motta ... kw-z-wave/

where i can set a default POWER ON state.. so when i use the wall switch/contact it will always turn on.. can't find any or what to search for.. zwave or 433Mhz..
(had Tellstick Net v17) now Tellstick ZNet Lite v2, Denmark, Iphone/Mac/linux.
etompau
Posts: 2405
Joined: Fri Mar 17, 2023 9:45 am
Location: Skåne

Re: power switch, ON/OFF plug or similar

Post by etompau »

Can't really follow your description, "default power on"? Is it a recessed wall switch you want, that always turns on when you press the switch? Or a switch that remembers it's state after a power off/on
HarryL
Posts: 27
Joined: Fri Mar 17, 2023 9:45 am
Location: denmark

Re: power switch, ON/OFF plug or similar

Post by HarryL »

etompau wrote:Can't really follow your description, "default power on"? Is it a recessed wall switch you want, that always turns on when you press the switch? Or a switch that remembers it's state after a power off/on
yea something like that.. that always turn on when powered it's for a vent in the bathroom..
(had Tellstick Net v17) now Tellstick ZNet Lite v2, Denmark, Iphone/Mac/linux.
dico
Posts: 40
Joined: Fri Mar 17, 2023 9:45 am

Re: power switch, ON/OFF plug or similar

Post by dico »

I have a basic on/off z-wave plug from Telldus. On this devices I can set things like remember state (always on/off or last status) and timer (e.g. auto off in 90 minutes after turned on). Don't know about the one you are linking to, but I guess the parameters are pretty much the same.
Post Reply