TellstickNet - Support for control via WebUI ?

Moderator: Telldus

Post Reply
omicronCZ
Posts: 33
Joined: Thu Jan 18, 2018 11:08 am

TellstickNet - Support for control via WebUI ?

Post by omicronCZ » Thu Jan 18, 2018 11:08 am

Is there any way or chance to control Tellstick Net of another system in the form of orders to TellstickNet WebUI:
http://TellstickNet.IP/devcode/on-off-dimm/ etc?

I have been using a different system for home automation (HomeMatic), which in this way can control external devices with its own WebUI...

I know it's not now, but plans a developer to support or extension?
It would have helped sales, if it were possible TellstickNet externally controlled as follows ...

omicronCZ
Posts: 33
Joined: Thu Jan 18, 2018 11:08 am

Re: TellstickNet - Support for control via WebUI ?

Post by omicronCZ » Thu Jan 18, 2018 11:08 am

After a year of no new information?
It really is not possible to implement this support for TellstickNet control via URL commands?
I need to integrate TellstickNET into my HomeMatic home automation ...
Thank you.

simonbove
Posts: 109
Joined: Thu Jan 18, 2018 11:08 am

Re: TellstickNet - Support for control via WebUI ?

Post by simonbove » Thu Jan 18, 2018 11:08 am

Im not a developer, but they have released the firmware, so you can build your own custom firmware.

if yoi need to implement the tellstick right now in your web gui, then i would use the api from telldus live. yes it will use the internet, but i think its the easiest way right now..

omicronCZ
Posts: 33
Joined: Thu Jan 18, 2018 11:08 am

Re: TellstickNet - Support for control via WebUI ?

Post by omicronCZ » Thu Jan 18, 2018 11:08 am

Instead me a description of the URL commands for TellstickNET, as http://local_ip_adress_of_TellstickNET/appliance/On-Off etc...

simonbove
Posts: 109
Joined: Thu Jan 18, 2018 11:08 am

Re: TellstickNet - Support for control via WebUI ?

Post by simonbove » Thu Jan 18, 2018 11:08 am

Iyts not as easy as that, because then everyone could control your items...But again im not a developer, so i dont know the details.. you have to read about the api..

Nautilus
Posts: 80
Joined: Thu Jan 18, 2018 11:08 am

Re: TellstickNet - Support for control via WebUI ?

Post by Nautilus » Thu Jan 18, 2018 11:08 am

omicronCZ wrote:Instead me a description of the URL commands for TellstickNET, as http://local_ip_adress_of_TellstickNET/appliance/On-Off etc...
Well, it is doable. E.g. user Henkepenka has written an XBMC plugin (http://www.telldus.com/forum/viewtopic.php?f=1&t=2364) which can control your Tellstick devices. If you look into the code, the control happens with url calls like:

googleandroid.se/xbmc/tellstick/lightEvent.php?un[your_unique_systemid]&device_id=[device id]&action=[1 = on, 2 = off, dim]
e.g. googleandroid.se/xbmc/tellstick/lightEvent.php?un=GfT8bg&device_id=178990&action=2 (all parameters are made up, sorry if this controls someone's lights :wink: )

And this has nothing to do with XBMC, as simplest you just type the url to a web browser and vóila. Your device id's you can get e.g. from http://api.telldus.com/explore/devices/list

Not sure how secure this is though, better not share the systemid anywhere at least...

omicronCZ
Posts: 33
Joined: Thu Jan 18, 2018 11:08 am

Re: TellstickNet - Support for control via WebUI ?

Post by omicronCZ » Thu Jan 18, 2018 11:08 am

Thank you very much.
This syntax looks good, just do not know yet:
- Where to find it "your_unique_systemid", it probably will not "Code for activation", which is written directly on the label of TellstickNET device?
- For DIMM that is functional as a standard remote control?
This is the first turn 1 is ON, next "1" is start another fade cycle, the next "1" is stop DIMM and "2" switch them off?

Nautilus
Posts: 80
Joined: Thu Jan 18, 2018 11:08 am

Re: TellstickNet - Support for control via WebUI ?

Post by Nautilus » Thu Jan 18, 2018 11:08 am

omicronCZ wrote:Thank you very much.
This syntax looks good, just do not know yet:
- Where to find it "your_unique_systemid", it probably will not "Code for activation", which is written directly on the label of TellstickNET device?
- For DIMM that is functional as a standard remote control?
This is the first turn 1 is ON, next "1" is start another fade cycle, the next "1" is stop DIMM and "2" switch them off?
Hi,

I suggest referring to the XBMC discussion where there is more info (link on my previous reply). Once you create a username to the service at googleandoid.se, you'll get the system id from there. The Dim function uses percentages I think, so something like Dim50, Dim20 etc.

individual
Posts: 72
Joined: Thu Jan 18, 2018 11:08 am

Re: TellstickNet - Support for control via WebUI ?

Post by individual » Thu Jan 18, 2018 11:08 am

omicronCZ wrote:Thank you very much.
This syntax looks good, just do not know yet:
- Where to find it "your_unique_systemid", it probably will not "Code for activation", which is written directly on the label of TellstickNET device?
- For DIMM that is functional as a standard remote control?
This is the first turn 1 is ON, next "1" is start another fade cycle, the next "1" is stop DIMM and "2" switch them off?
It is a bit hidden in their website, but here it is: http://api.telldus.com/

Go to Your Keys from the menu.
TellStick Net v17 controller
COCO Technology & Proove switches/dimmers
Oregon THGN132N & Proove sensors
Software: Tasker, Remotestick, Telldus Live, DomoSpeak, TelLIVE Remote, Tellmon

omicronCZ
Posts: 33
Joined: Thu Jan 18, 2018 11:08 am

Re: TellstickNet - Support for control via WebUI ?

Post by omicronCZ » Thu Jan 18, 2018 11:08 am

Nautilus wrote:
omicronCZ wrote:Thank you very much.
This syntax looks good, just do not know yet:
- Where to find it "your_unique_systemid", it probably will not "Code for activation", which is written directly on the label of TellstickNET device?
- For DIMM that is functional as a standard remote control?
This is the first turn 1 is ON, next "1" is start another fade cycle, the next "1" is stop DIMM and "2" switch them off?
Hi,
I suggest referring to the XBMC discussion where there is more info (link on my previous reply). Once you create a username to the service at googleandoid.se, you'll get the system id from there. The Dim function uses percentages I think, so something like Dim50, Dim20 etc.
Unfortunately I do not know where and how to get the user name service googleandoid.se, the whole thing is only in Swedish ( :cry: ), anywhere on the page googleandoid.se not nothing about XMBC.
Can you please to guide exactly where I register, sign in and I get the code? Thank you so much.

omicronCZ
Posts: 33
Joined: Thu Jan 18, 2018 11:08 am

Re: TellstickNet - Support for control via WebUI ?

Post by omicronCZ » Thu Jan 18, 2018 11:08 am

individual wrote:
omicronCZ wrote:Thank you very much.
This syntax looks good, just do not know yet:
- Where to find it "your_unique_systemid", it probably will not "Code for activation", which is written directly on the label of TellstickNET device?
- For DIMM that is functional as a standard remote control?
This is the first turn 1 is ON, next "1" is start another fade cycle, the next "1" is stop DIMM and "2" switch them off?
It is a bit hidden in their website, but here it is: http://api.telldus.com/ Go to Your Keys from the menu.
Unfortunately, I am afraid that this is another code ...

Nautilus
Posts: 80
Joined: Thu Jan 18, 2018 11:08 am

Re: TellstickNet - Support for control via WebUI ?

Post by Nautilus » Thu Jan 18, 2018 11:08 am

omicronCZ wrote: Can you please to guide exactly where I register, sign in and I get the code? Thank you so much.
Hmm, there was an English discussion as well, maybe I pointed to the Swedish one by accident. In any case, you should be able to connect Tellstick Net here:
http://www.googleandroid.se/xbmc/tellstick/index.php

Oh, and here's the English discussion: http://www.telldus.com/forum/viewtopic.php?f=11&t=2365

jens.hoofs
Posts: 4
Joined: Thu Jan 18, 2018 11:08 am

Re: TellstickNet - Support for control via WebUI ?

Post by jens.hoofs » Thu Jan 18, 2018 11:08 am

I am trying to do the same thing.
But i am trying to do it thourgh an app for android called tasker.

You can controll your devices by url quite simple.
If you use Fiddler it will see what urls you press. Login to your device and press an on or off button Fiddler will save the url and you can use that to turn stuff on or off.
Example: live.telldus.com/device/switch?mode=on&id=[device id goes here without brackets]
This will only work if your logged in.

And that is the only part i dont know how to do from a client it is easy in an brwoser you can use your google acount and the link:
https://login.telldus.com/user/openid?identity=google

But this wont work with a http get.

omicronCZ
Posts: 33
Joined: Thu Jan 18, 2018 11:08 am

Re: TellstickNet - Support for control via WebUI ?

Post by omicronCZ » Thu Jan 18, 2018 11:08 am

Thanks, I need to send URL links for On/Off/Dimm light on my "TellStickNET":

- URL link needs to insert into some scripts in my "Domotica" system (home automation)
- some Android systems with installed applications "TellStickNET" I have
- I do not know where he finds it necessary "ID"
- I do not know what is "Fiddler" ...

Thank you for your understanding and possible assistance

Post Reply