Search found 57 matches

by misterleffe
Thu Jan 18, 2018 11:08 am
Forum: Automagically
Topic: Wireless Energy Meter Plugin - BETA
Replies: 25
Views: 20848

Re: Wireless Energy Meter Plugin - ALPHA

Ok, when I read the text more carefully, I noticed what you are telling me. Sometimes I'm to fast and don't read everything. Now I'll have completed the energy measuring in all points. It seems to be counting and the kWh is rising for every minute and it makes me poorer and poorer ... But even lucky...
by misterleffe
Thu Jan 18, 2018 11:08 am
Forum: Automagically
Topic: WiFi Adaptor
Replies: 14
Views: 9251

Re: WiFi Adaptor

Ok thanks! Now my Pi is wireless + Ethernet. Both with static IP. I will have a look for reserved IP in my router. I'm not sure if it's possible to do that in my ASUS RT-N56U. Looks quite possible to me, would doubt if it wasn't. http://event.asus.com/2009/networks/dummy_ui/en/Advanced_DHCP_Content...
by misterleffe
Thu Jan 18, 2018 11:08 am
Forum: Automagically
Topic: Wireless Energy Meter Plugin - BETA
Replies: 25
Views: 20848

Re: Wireless Energy Meter Plugin - BETA

Lot of work you have done Marcus! Hopefully it will be implemented in Automagically later on. :D Now it's a lot of information and just for sort it out ... Should i delete the previous version of wem in the "plugin directory" and replace it with the attached version? After replacement of the new ver...
by misterleffe
Thu Jan 18, 2018 11:08 am
Forum: Automagically
Topic: Wireless Energy Meter Plugin - BETA
Replies: 25
Views: 20848

Re: Wireless Energy Meter Plugin - BETA

Ok Marcus, but I don't get the point to have a reset every hour. If I disable or enable the data fetcher, the curve for "accumulatedEnergy" will not change. It's showing the same curve. Maybe I don't understand this correct. "That is how it will look in an Automagically remote, yes. But in Xively: n...
by misterleffe
Thu Jan 18, 2018 11:08 am
Forum: Automagically
Topic: Another strange behavior ...
Replies: 16
Views: 11787

Another strange behavior ...

Suddenly stops Automagically and will not deliver any data. Nor to Xively or in the Signal trace. If I make a turn off and a turn on in Signal trace it will NOT update the tracking. This happens with no regularity. First I see it in Xively, the graph i just flat with no changing. If I connect with P...
by misterleffe
Thu Jan 18, 2018 11:08 am
Forum: Automagically
Topic: Wireless Energy Meter Plugin - BETA
Replies: 25
Views: 20848

Re: Wireless Energy Meter Plugin - BETA

Ok Marcus, I didn't understand that about Xively, the limitations... Thanks for sorting it out for me! Ok, to have datapoints in spreadsheets, that will rise the statistic to a "higher level". Then you can make any diagram you want. Of course, I'm ready to test whenever you have a beta version on th...
by misterleffe
Thu Jan 18, 2018 11:08 am
Forum: Automagically
Topic: Updated image available [2014-03-07]
Replies: 18
Views: 19377

Re: Updated image available [2014-03-07]

I've downloaded your image from the torrentfile and installed it properly. Has expanded the filesystem as you suggest. I've put the plugins wem and googlespread in the plugin directory. I have made 1 Transform and send it to Xively, but it's not popping up there. But it will not play properly ... Th...
by misterleffe
Thu Jan 18, 2018 11:08 am
Forum: Automagically
Topic: Another strange behavior ...
Replies: 16
Views: 11787

Re: Another strange behavior ...

This is the same behavior I mentioned in a parallel thread. My system stabilized by disabling live and has now been up an feeding Xively for more than 10 days. Can you try to disable live and see if it gets better? Is may be possible to check the condition David mentions by tdtool -l If you do this...
by misterleffe
Thu Jan 18, 2018 11:08 am
Forum: Automagically
Topic: 1 Wire for Pi
Replies: 4
Views: 4070

Re: 1 Wire for Pi

Någon som testat dessa med Automagically? https://www.m.nu/rpi-i2c-1wire-expansion-module-v11-p-677.html http://wiki.temperatur.nu/index.php/OWFS_on_Rasperry_Pi /Marcus Jag kör något liknande kort, men som sagt automagically bryr sig inte om hårdvaran, det viktiga är att owserver kan kommunicera me...
by misterleffe
Thu Jan 18, 2018 11:08 am
Forum: Automagically
Topic: Another strange behavior ...
Replies: 16
Views: 11787

Re: Another strange behavior ...

As I wrote earlier, the mentioned problems came with when I installed your clean torrent-imgage. Seems very strange ... Now I'm running a, from scratch, clean image of my own. I've 6 tempsensors, live energy metering, 2 devices (just on/off). Beside these, I have statistics for TO_MANY_LOST_PACKAGES...
by misterleffe
Thu Jan 18, 2018 11:08 am
Forum: Automagically
Topic: Another strange behavior ...
Replies: 16
Views: 11787

Re: Another strange behavior ...

Mrleffe, have you updated your Tellstick to latest firmware version? /Marcus Yes, it's updated with latest firmware. It was done a week ago. Marcus, I will say thank you, for your efforts for helping me. I haven't upgraded wem to 0.9 yet, but I will. Today I have been at "Trandansen" and made a lot...
by misterleffe
Thu Jan 18, 2018 11:08 am
Forum: Automagically
Topic: WiFi Adaptor
Replies: 14
Views: 9251

Re: WiFi Adaptor

I've been using a cheap wifi adaptor for my raspberries: Mini Ralink RT5370 USB Wifi Adaptador WLAN 802.11n/g/b (http://www.ebay.com/itm/360761868248) While i am sure there is higher quality products on the market it works fine powered from the raspberry (with a tellstick duo in the other usb port)...
by misterleffe
Thu Jan 18, 2018 11:08 am
Forum: Automagically
Topic: Calculations in Automagically?
Replies: 1
Views: 2619

Calculations in Automagically?

Is it possible e.g. make mathematical calculations, like addtion, subtraction, divison and multiplication for a sensor value? Also calculation of arguments like if, else, and, not for given values? If you have som examples, it would be appreciated. Maybe, if it's possible, put this in the Wiki for A...
by misterleffe
Thu Jan 18, 2018 11:08 am
Forum: Automagically
Topic: WiFi Adaptor
Replies: 14
Views: 9251

Re: WiFi Adaptor

This is what I get from iwconfig . I have the same lines in both files as you have Marcus. It seems that I don't have the correct settings .... pi@raspberrypi ~ $ iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan1 unassociated Nickname:"<WIFI@REALTEK>" Mode:Managed Frequency=2.41...
by misterleffe
Thu Jan 18, 2018 11:08 am
Forum: Automagically
Topic: WiFi Adaptor
Replies: 14
Views: 9251

Re: WiFi Adaptor

Ok thanks! Now my Pi is wireless + Ethernet. Both with static IP. I will have a look for reserved IP in my router. I'm not sure if it's possible to do that in my ASUS RT-N56U.


/misterleffe