My forum

Efter att ha låtit den tillbringa några år helt oanvänd i sin originallåda har jag försökt driftsätta en Zipato Keyfob 5 för att styra belysningen i ett rum med två Qubino-enheter (som redan är framgångsfullt adderade till en Tellstick ZNet Lite v2 som "Secure"). 1) Mini Dimmer 2) Flush Di...

I have come a bit further on the MQTT topic by studying the https://media.readthedocs.org/pdf/tellstick-server/latest/tellstick-server.pdf. So I took a Raspberry PI and downloaded the Tellstick Server and Tellstick Server Plugins from GitHub $ git clone https://github.com/telldus/tellstick-server.gi...

I just upgraded from Tellstick Net to a ZNet Lite v2 Is there any plugin or LUA, etc script available so that I can have my new Tellstick hardware to publish sensordata via MQTT? My broker sit on a Raspberry PI on local LAN so I would prefer if the Tellstick made a local "publish" instead ...

Fick e-post till mitt konto registrerat på Telldus Live!

En kollega fick sitt erbjudande flera veckor före mig; dvs det verkar inte ha gått ut till alla samtidigt.

@Fredrik 1^3 TACK!!!! Får nu in 433MHz datat, återstår att se om ZWave sensorerna kommer med (hoppas o håller båda tummarna!!!) /GARAGE/TEMP 18.625 /RAIN_METER/COUNT 751293 /ELECTRICITY_METER/CURRENT_POWER 840 /RAIN_METER/RAIN1HOUR 0.0 /RAIN_METER/RAIN1DAY 0.0 /TELLSTICK/sensor/6/value {"valueT...

YESSSSS Z-wave here I come!!! /TELLSTICK/sensor/17/value {valueType: 256, scale: 2, value: 0.3} /TELLSTICK/sensor/17/value {valueType: 256, scale: 2, value: 0.3} /TELLSTICK/device/17/state {state: 1, stateValue: } /TELLSTICK/sensor/17/value {valueType: 256, scale: 2, value: 25.9} /TELLSTICK/sensor/1...

@Fredrik: trots att jag haft en Tellstick i flera år är jag är lite ny på programmeringsdelarna av Telldus. Jag hoppas att du inte har något emot en fråga eller så? Nr1: hur räknar Tellsticken ut DeviceID? Enumererar den allt den hör och lagrar på något internt flashminne? Att min energimätande PAN1...

Hej Som ämnet indikerar är jag intresserad av att koppla min Tellstick ZNet Lite v2 till en MQTT Broker. Jag har hämtat hem pluginet från GitHub o byggt ett "ägg", men det går inte att ladda upp till min Tellstick... ... har en forumtråd på den engelska sidan, men det är sparsamt med feedb...

Two years later... ... after having run into some issues with two recently added ZWave-devices which I got back running by removing and adding them to the Tellstick I found that the MQTT topic from the Tellstick had become silent. The MQTT Client plugin has been running well for over two years... so...

How did you solve this? I have come as far as you describe in your message and stuck at the same place. https://forum.telldus.com/viewtopic.php?f=1&t=14954&sid=6dd5b072487c7513fea03eefb231b956#p50199 Sorry for not detecting this question until now. The answer is: I never found out. I could ...

Har nu provat med en helt omladdad Raspberry med aktuell version av Debian Buster och nyhämtade project från GitHub. # uname -a Linux rpi6 5.10.17+ #1403 Mon Feb 22 11:26:13 GMT 2021 armv6l GNU/Linux # lsb_release -a No LSB modules are available. Distributor ID: Raspbian Description: Raspbian GNU/Li...

One more failed attempt... dang :banghead: :banghead: :banghead: S O S... I downloaded an older Debian Stretch from https://downloads.raspberrypi.org/raspbian/images Since I was able to build the MQTT Plugin roughly two years ago I decided to load the 2018-NOV-15 release some months ahead of that ti...

Is it possible for a locally running subscriber to subscribe also for Z-wave sensor data? I have a Philio PAN11 on/off wall socket plug that periodically updates a kWh metering counter in Telldus Live! once per hour. Using the "tellsticknet" Python software (https://github.com/molobrakos/t...

I can now add, an attempt to build the mqtt-plugin, fresh from https://github.com/telldus/tellstick-server-plugins on a freshly installed Ubuntu Server 20.04 on VMware Workstation 16 running on Windows 10 failed in the exact same spot as it have done on Raspbian Debian Stretch and Buster.

I can also add that an attempt to replace the embedded pip version at tellstick-server/build/env/local/lib/python2.7/site-packages with the one coming with the standard Python package for Debian has made the tellstick.sh build script to take a few more steps. I now get the Python .egg output files b...