door locks and tellstick
Moderator: Telldus
door locks and tellstick
Hi,
My guess is that door locks would not be a good idea on tellstick Net, but would like to know the possibilities.. both with net(433) /znet(zwave/zeebee)..
My guess is that door locks would not be a good idea on tellstick Net, but would like to know the possibilities.. both with net(433) /znet(zwave/zeebee)..
(had Tellstick Net v17) now Tellstick ZNet Lite v2, Denmark, Iphone/Mac/linux.
-
- Posts: 86
- Joined: Fri Mar 17, 2023 9:45 am
Re: door locks and tellstick
Danalock (Danish company)
Re: door locks and tellstick
I know Danalock yes ,-) danish company but does it work with tellstick that was my question.. does any locks work with tellstick
(had Tellstick Net v17) now Tellstick ZNet Lite v2, Denmark, Iphone/Mac/linux.
Re: door locks and tellstick
It depends on what type of lock mechanism you have. A simple relay receiver, eg Nexa WRR-1 could easily be connected to a electromagnetic lock mechanism.
Perhaps not the highest level of security, but good enough for garden shed/garage.
The danalock system seems to have a Z-wave compatible lock, then the Tellstick ZNet could be used (but not the Tellstick Net).
Perhaps not the highest level of security, but good enough for garden shed/garage.
The danalock system seems to have a Z-wave compatible lock, then the Tellstick ZNet could be used (but not the Tellstick Net).
Re: door locks and tellstick
I have only a normal lock, just was wondering if there where any real world experiences.. and hardware we knew worked.
in short does anyone know if danalock works with tellstick znet?
in short does anyone know if danalock works with tellstick znet?
(had Tellstick Net v17) now Tellstick ZNet Lite v2, Denmark, Iphone/Mac/linux.
Re: door locks and tellstick
I use danalock v3 with Tellstick znet It works fine but I havent tried
to configure the lock through telldus live. I also have it set up in homeassistant
via telldus with automations and it works fine
to configure the lock through telldus live. I also have it set up in homeassistant
via telldus with automations and it works fine
Re: door locks and tellstick
I have problems in configuring Telldus with Danalock v3. Kenvase (or anyone), can you help me how to configure it (coudn't find direct messaging)
Ideas?
- You mentioned that you didn't use telldus live, isn't that the only place to add new devices?
- When I try to add danalock, the inclusion process hangs when it is 50% ready
- If I reload the browser, I can see a new device with a name 'Device nn'.
- When looking at it, telldus tells that it is an unknown device. However, the image of danalock v3 is included and all Zwave information seems to be in the place (e.g. additional settings like twist assist)
- The device is seen as a normal switch in telldus live and HomeAssistant
Ideas?
Re: door locks and tellstick
I do use telldus live to set it up. the dana lock is unknown device in mine as well(don't know why) . it will act as a switch as you say. To me it sounds like it didn't register correctly.
I had my telldus within 1'5 meters when regestring it in telldus. I think you shoulď remove it and reregister it.
I had my telldus within 1'5 meters when regestring it in telldus. I think you shoulď remove it and reregister it.
Re: door locks and tellstick
Thanks kenvase,
I did factory reset for the lock and did everything again. And now it connected.
Locking and unlocking works ok, but not a perfect solution:
I did factory reset for the lock and did everything again. And now it connected.
Locking and unlocking works ok, but not a perfect solution:
- the distance from Telldus has to be quite short
- if the (un)locking failed, I did not get any feedback in telldus
- if a (un)lock using mobile/key, the status is not updated in Telldus
Re: door locks and tellstick
I have Telldus z-wave plug as repeater 50cm from lock to make it work.the distance from Telldus has to be quite short
During inclusion I had TellStick 50cm from Danalock, and it still took 12+ tries to make it work.
I get a text flashing by in iPhone app, visible for 1-2 seconds only.if the (un)locking failed, I did not get any feedback in telldus
I had this working before power outage and TellStick erasing all devices. I have not got it working again yet...if a (un)lock using mobile/key, the status is not updated in Telldus
Re: door locks and tellstick
Even if your danalock works to lock and unlock it has probably not finished the interview with telldus. That's why status does not change.
Same happened to me but Telldus support fixed it.
Same happened to me but Telldus support fixed it.