One or more sockets with Raspberry Pi
Posted: Fri Mar 17, 2023 9:45 am
Hello All
It's been a while but I have been tinkering still. However I have now got another problem.
I don't appear to be able to have more than one socket to control. My conf file is below:
In a previous post I was able to pair up the first plug using:
However try as I might to follow the same instructions for the second plug I can not get it to operate in the same way. The closest I do get is using:
Yet this seems just to turn the plug on and then do nothing much else.
For reference the plugs are the Home Easy HE830 version with the Arctech protocol.
I hope someone can help with this before I start tearing hair out!
It's been a while but I have been tinkering still. However I have now got another problem.
I don't appear to be able to have more than one socket to control. My conf file is below:
Code: Select all
user = "pi"
group = "plugdev"
ignoreControllerConfirmation = "false"
device {
id = 1
name = "Fan"
protocol = "arctech"
model = "selflearning-switch"
parameters {
house = "1"
unit = "1"
}
}
device {
id = 101
name = "Fan2"
protocol = "arctech"
model = "selflearning-switch"
parameters {
house = "2"
unit = "2"
}
}
Code: Select all
tdtool -e 1
Code: Select all
tdtool -e 101
For reference the plugs are the Home Easy HE830 version with the Arctech protocol.
I hope someone can help with this before I start tearing hair out!