Database with tested sensors/recievers

Moderator: Telldus

LarsChr
Posts: 44
Joined: Fri Mar 17, 2023 9:45 am

Database with tested sensors/recievers

Post by LarsChr »

Hi,
We are now trying to gather the information in a Wiki:

Http://tellstick-net.wikia.com/

Looking forward to your contribution :)

It seems that posts of the type "does sensor brand X model z work with tellstick NET?" is quite common. The standard reply is referring the user to http://telldus.se/products/compability. Although this provides a good overview, it also seems that some sensors from other brands work (ie ebay, dealxtreme etc).

It would be nice to have a user modifiable database where everyone could post which sensors/receivers they have tested etc. Then a simple search in this database could be of great help. Brand, model, articlenumber, type of sensor, and possible link to “place of purchase” and price could be provided.

What do you guys think? Could this be useful? And if so, can any tech-savvy people make such database?

Best regards
Lars
Last edited by LarsChr on Wed Feb 19, 2014 2:27 pm, edited 1 time in total.
simonbove
Posts: 109
Joined: Fri Mar 17, 2023 9:45 am

Re: Database with tested sensors/recievers

Post by simonbove »

great idea
LarsChr
Posts: 44
Joined: Fri Mar 17, 2023 9:45 am

Re: Database with tested sensors/recievers

Post by LarsChr »

Previously a link to the database, but as mentioned over, we created a Wiki instead.
Last edited by LarsChr on Wed Feb 19, 2014 6:50 pm, edited 1 time in total.
simonbove
Posts: 109
Joined: Fri Mar 17, 2023 9:45 am

Re: Database with tested sensors/recievers

Post by simonbove »

Really nice, but could you add a comment box? and what is the price unit? I added one in dollar, and i was not able to put a dollar sign afterwards...

Otherwise great idea :)
LarsChr
Posts: 44
Joined: Fri Mar 17, 2023 9:45 am

Re: Database with tested sensors/recievers

Post by LarsChr »

Hi,

Great that you want to contribute. I have left the idea of this database and started on a Wiki instead. It is easier to edit and everyone can contribute.

Here's the adress:

http://tellstick-net.wikia.com/wiki/

It is open for everyone!
simonbove
Posts: 109
Joined: Fri Mar 17, 2023 9:45 am

Re: Database with tested sensors/recievers

Post by simonbove »

Thats even better :D

I have added a few items :D

Very nice... Now we just need to get the link on the homepage, so everyone can find the page :D
LarsChr
Posts: 44
Joined: Fri Mar 17, 2023 9:45 am

Re: Database with tested sensors/recievers

Post by LarsChr »

Good thing you posted there. Let's hope others contribute as well.
simonbove
Posts: 109
Joined: Fri Mar 17, 2023 9:45 am

Re: Database with tested sensors/recievers

Post by simonbove »

Yeah.. i will write an email to telldus and ask if they could setup a link under the device section on their homepage..
simonbove
Posts: 109
Joined: Fri Mar 17, 2023 9:45 am

Re: Database with tested sensors/recievers

Post by simonbove »

Got this answer from support :-D
Telldus answers: 2014-02-18 - 10:26
Hi!
This is a great idea, and probably something we should have done ourselves already but haven't.

We'll link to your wiki, but if we discover that it doesn't work out (if it's confusing or stops getting updated) we may have to remove the links again.

One thing you'll probably have to consider is the different firmware versions. Some devices can only be controlled after a firmware update, and the firmware version should probably be included in the "Tested with"-part.

If you need our help to clarify anything let us know and we'll do our best.
I will go ahead and update the pages I have created with my firmware version..
LarsChr
Posts: 44
Joined: Fri Mar 17, 2023 9:45 am

Re: Database with tested sensors/recievers

Post by LarsChr »

Good,

But keep in mind, the site is so far just a pilot. That especially goes for the formatting, so it will be a bit "messy" in the beginning. Hopefully we will find a system for formatting which is reproducible and applicable to all types of adapters etc.

The unit type (ie terminology concerning function) should be standardized, but as for now, my knowledge is limited and i do not have the complete overview over what types of equipment is available. I propose a possible division (please help me fill inn the blanks):
Basicly, you can divide all equipment into two main categories: Recievers and Sensors (?)

Recievers:
1. Wall socket - switch
2. Wall socket - Dimmer
3. ....
x...

Sensors:
1. Thermometer
2. Hygrometer
3. Thermo- and hygrometer
4. Motion sensor
5. Smoke detector
6. Magnet sensors
x. xx

What about wall switches, such as nexa LWST-605? Are these used to communciate with the tellstick unit aswell, or only the wall socket switch?

best regards
Lars Chr
Last edited by LarsChr on Sat Feb 22, 2014 3:55 pm, edited 1 time in total.
Borgso
Posts: 6
Joined: Fri Mar 17, 2023 9:45 am

Re: Database with tested sensors/recievers

Post by Borgso »

Hi

Added Ebay Magnetic Sensors that i have tested against TelldusDUO.

http://tellstick-net.wikia.com/wiki/NON ... uff_etc..)
simonbove
Posts: 109
Joined: Fri Mar 17, 2023 9:45 am

Re: Database with tested sensors/recievers

Post by simonbove »

Borgso wrote:Hi

Added Ebay Magnetic Sensors that i have tested against TelldusDUO.

http://tellstick-net.wikia.com/wiki/NON ... uff_etc..)
Thanks.. Just bought 3 pcs :-)
simonbove
Posts: 109
Joined: Fri Mar 17, 2023 9:45 am

Re: Database with tested sensors/recievers

Post by simonbove »

The link is now on the telldus webpage..

http://www.telldus.com/products/compability

Hopefully we will be able to get even more people onto the wiki :-)
Borgso
Posts: 6
Joined: Fri Mar 17, 2023 9:45 am

Re: Database with tested sensors/recievers

Post by Borgso »

Oh, i have forgot to mention that this Ebay switch have its downside:
This magnetic switch only send signal when magnet is moved away from main part. You will not get "on"+"off" as this item acts as a "Bell". The "turnon"/"turnoff" in example signals are only aviable if you choose this with jumper settings. In other way: its not working the same way as Nexa/Proove magnetic switch that send signals both when magnet is moved away and attached.
simonbove
Posts: 109
Joined: Fri Mar 17, 2023 9:45 am

Re: Database with tested sensors/recievers

Post by simonbove »

Borgso wrote:Oh, i have forgot to mention that this Ebay switch have its downside:
This magnetic switch only send signal when magnet is moved away from main part. You will not get "on"+"off" as this item acts as a "Bell". The "turnon"/"turnoff" in example signals are only aviable if you choose this with jumper settings. In other way: its not working the same way as Nexa/Proove magnetic switch that send signals both when magnet is moved away and attached.
Thats okay, i will just create a task to turn it off after 5 sec with tasker :-)
Post Reply