Support for Nexa LCMR-230

Moderator: Telldus

martinoc
Posts: 9
Joined: Fri Mar 17, 2023 9:45 am

Support for Nexa LCMR-230

Post by martinoc »

Hi,

Has anyone fitted any of these?

http://m.clasohlson.com/uk/Nexa-LCMR-23 ... r364611000

I'm looking for a ceiling light controller which works with Tellstick Net and would love to know if anyone has found one.

Cheers,
Martin
jorang
Posts: 259
Joined: Fri Mar 17, 2023 9:45 am
Location: Norway

Re: Support for Nexa LCMR-230

Post by jorang »

This one should work. Afaik all Nexa switches/ dimmers should work with 'Live!' as long as they are on 433MHz.

Support for other Nexa devices (magnet contacts, PIR etc) are pt in beta
______________________________
Mvh/ BR JoranG
martinoc
Posts: 9
Joined: Fri Mar 17, 2023 9:45 am

Re: Support for Nexa LCMR-230

Post by martinoc »

Thanks for your help.

Martin
kets
Posts: 16
Joined: Fri Mar 17, 2023 9:45 am

Re: Support for Nexa LCMR-230

Post by kets »

which of the nexa range will work with my non-dimmable LED GU10s (I have 6 per room each running at 4w)
martinoc
Posts: 9
Joined: Fri Mar 17, 2023 9:45 am

Re: Support for Nexa LCMR-230

Post by martinoc »

You can use the one if the total power exceeds 20W connected load. This is quite annoying as most low energy bulbs are less than 20W. Although it should be ok if your 6 x 4W connected to to a single switch. Semiconductor switches need a minimum load to conduct.
kets
Posts: 16
Joined: Fri Mar 17, 2023 9:45 am

Re: Support for Nexa LCMR-230

Post by kets »

would this Nexa work with my non-dimmable LEDS (6 x 4w) ??

http://www.clasohlson.com/uk/Nexa-LCMR- ... r364608000
martinoc
Posts: 9
Joined: Fri Mar 17, 2023 9:45 am

Re: Support for Nexa LCMR-230

Post by martinoc »

I think so. They are generally ok if sum is more than 20W
Jean-Charles71
Posts: 19
Joined: Fri Mar 17, 2023 9:45 am
Location: France - Chalon sur Saône (71)
Contact:

Re: Support for Nexa LCMR-230

Post by Jean-Charles71 »

Hi
You can also use the Intertechno ITL-250.
It's a radio-controlled (433.92 MHz) LED dimmer.
Switching power : 2 - 250 watts (LED)
20 - 250 watts (light bulb)
Regards
Jean-Charles71
kets
Posts: 16
Joined: Fri Mar 17, 2023 9:45 am

Re: Support for Nexa LCMR-230

Post by kets »

Jean-Charles71 wrote:Hi
You can also use the Intertechno ITL-250.
It's a radio-controlled (433.92 MHz) LED dimmer.
Switching power : 2 - 250 watts (LED)
20 - 250 watts (light bulb)
Regards
Jean-Charles71

so if i have a room with 2 x 3w LED bulbs this will still work as minimum load is 2w ???
Jean-Charles71
Posts: 19
Joined: Fri Mar 17, 2023 9:45 am
Location: France - Chalon sur Saône (71)
Contact:

Re: Support for Nexa LCMR-230

Post by Jean-Charles71 »

Yes the minimum load is 2W.
Please find the user manual.
Best regards
Jean-Charles71
Attachments
Image 1.png
Image 1.png (56.04 KiB) Viewed 15526 times
kets
Posts: 16
Joined: Fri Mar 17, 2023 9:45 am

Re: Support for Nexa LCMR-230

Post by kets »

Excellent - normally minimum load on these types of switches is 20W like switches from HE107 - which then blew cause not enough voltage

I assume the Intertechno ITL-250 works with the TellStick Net ? How do I teach my TellStick to recognise it ?
Jean-Charles71
Posts: 19
Joined: Fri Mar 17, 2023 9:45 am
Location: France - Chalon sur Saône (71)
Contact:

Re: Support for Nexa LCMR-230

Post by Jean-Charles71 »

Hi Kets
you can find some information here :
http://www.telldus.se/products/guides?s ... lflearning
Best regards
Jean-Charles71
Attachments
Image 3.png
Image 3.png (31.51 KiB) Viewed 15464 times
kets
Posts: 16
Joined: Fri Mar 17, 2023 9:45 am

Re: Support for Nexa LCMR-230

Post by kets »

Jean-Charles71 wrote:Hi Kets
you can find some information here :
http://www.telldus.se/products/guides?s ... lflearning
Best regards
Jean-Charles71

ok where can i buy some ? and how much inc delivery ?
Jean-Charles71
Posts: 19
Joined: Fri Mar 17, 2023 9:45 am
Location: France - Chalon sur Saône (71)
Contact:

Re: Support for Nexa LCMR-230

Post by Jean-Charles71 »

Hi Kets
Where are you from?
kets
Posts: 16
Joined: Fri Mar 17, 2023 9:45 am

Re: Support for Nexa LCMR-230

Post by kets »

Jean-Charles71 wrote:Hi Kets
Where are you from?
from the U.K.
Post Reply