Garageport styring

Moderator: Telldus

Ellhans
Posts: 1
Joined: Thu Jan 18, 2018 11:08 am

Garageport styring

Post by Ellhans » Thu Jan 18, 2018 11:08 am

Jeg har Tellstick duo og nexa produkter og er ute ette noe som jeg kan fjernstyre garageporten min med. Den har wire inngang til nøkkelstyring men der kan man også kople ett rele som gir kontakt til å kjøre ned eller opp. Det skal ikke være strøm inn på dem kontaktene men bare ett rele som korrslutter. Er det noen som har noen ideer på hva jeg kan bruke?

LoA
Posts: 24
Joined: Thu Jan 18, 2018 11:08 am

Re: Garageport styring

Post by LoA » Thu Jan 18, 2018 11:08 am

Jag hade samma problem som du och hittade då den här guiden (det är alltså inte jag som har gjort guiden, jag har bara gjort likadant):

http://www.minhembio.com/Frater/180405/

Det du gör är att du modifierar Nexa LCMR-1000 till att skicka en brytning utan att skicka vidare 230VAC.

Lycka till!

//LoA

cafs
Posts: 9
Joined: Thu Jan 18, 2018 11:08 am

Re: Garageport styring

Post by cafs » Thu Jan 18, 2018 11:08 am

First of all, sorry for posting in English but I dont have a clue on Swedish, maybe moderator would prefer to move it into English > hardware but I post it here since it is and reply to previous message.
I have reach this post searching for rele. And it seems it give you instructions to achieve what I want.
I have a heater which gives you a two wire Input for a Thermostatic sensor, which a rele so after it reaches a desired temperature it closes the circuit and the heater start heating. Right now I use a Crono-Thermostatic to control it for diferent temperatures depending of the day, time of the day and so on ...

I would like also to have the chance to put in parallel a control so I can start heater no mater which day or temperature it is.
I had been looking and I only found things like that http://www.tme.eu/es/Document/797af8059 ... ual_en.pdf which I am afraid they don't seem to be compatible which tellstick yet (or ever).

From what I could understand after google translation of http://www.minhembio.com/Frater/180405/ You are modifying a LCMR-1000 to be able to do so, so instead of switching on/off of 230v input it will switch another signal going through the two wires you add.
The problem is that something might be missing in translation because I cannot see how you it avoid switching the original input. Would someone be so kind to do some translation into english so I can try to understand it and don't fire up my house :D

Regards

reidar.ostrem
Posts: 45
Joined: Thu Jan 18, 2018 11:08 am

Re: Garageport styring

Post by reidar.ostrem » Thu Jan 18, 2018 11:08 am

Ellhans wrote:Jeg har Tellstick duo og nexa produkter og er ute ette noe som jeg kan fjernstyre garageporten min med. Den har wire inngang til nøkkelstyring men der kan man også kople ett rele som gir kontakt til å kjøre ned eller opp. Det skal ikke være strøm inn på dem kontaktene men bare ett rele som korrslutter. Er det noen som har noen ideer på hva jeg kan bruke?
Hei, jeg har brukt ett potensial fritt relé fra intertechno for styring av garage porten. Husker ikke I farten Hva det heter men det er en tråd her inne som jeg har skrevet Hva det heter

trasa
Posts: 29
Joined: Thu Jan 18, 2018 11:08 am

Re: Garageport styring

Post by trasa » Thu Jan 18, 2018 11:08 am

Måste vara den du menar
Jalusibrytare CMR-500
http://www.intertechno.at/produkte/empf ... R-500.html

reidar.ostrem
Posts: 45
Joined: Thu Jan 18, 2018 11:08 am

Re: Garageport styring

Post by reidar.ostrem » Thu Jan 18, 2018 11:08 am

trasa wrote:Måste vara den du menar
Jalusibrytare CMR-500
http://www.intertechno.at/produkte/empf ... R-500.html
Itl-1000 er det jeg har :-)

Olsok
Posts: 1
Joined: Thu Jan 18, 2018 11:08 am

Re: Garageport styring

Post by Olsok » Thu Jan 18, 2018 11:08 am

Hei, jeg har bestilt en slik som dette:"Wireless Rele Mottager WRR-1 Nexa Pro 433". Setter den opp med 1 sekunds intervall. Håper det løser saken.

jorang
Posts: 259
Joined: Thu Jan 18, 2018 11:08 am
Location: Norway

Re: Garageport styring

Post by jorang » Thu Jan 18, 2018 11:08 am

Olsok wrote:Hei, jeg har bestilt en slik som dette:"Wireless Rele Mottager WRR-1 Nexa Pro 433". Setter den opp med 1 sekunds intervall. Håper det løser saken.
Denne bryter 220V Ac . Styringen til min garageport er 24V Dc så jeg kunne ikke brukt denne. Har kjøpt Intertecno sin som linkes til over (ITL-1000 som er potensialfri)
Last edited by jorang on Wed Jan 02, 2013 2:07 pm, edited 2 times in total.
______________________________
Mvh/ BR JoranG

MrXs
Posts: 12
Joined: Thu Jan 18, 2018 11:08 am

Re: Garageport styring

Post by MrXs » Thu Jan 18, 2018 11:08 am

Köpte ITL-1000 som är potentialfri brytare.
Som sagt märkligt att Nexa eller proove inte har det i sitt sortiment.

I Sverige finns de på Hornbach för 349:- (köpte min i Malmö)
Kollade på Bauhaus först men de har inte dem i sitt sortiment.

jorang
Posts: 259
Joined: Thu Jan 18, 2018 11:08 am
Location: Norway

Re: Garageport styring

Post by jorang » Thu Jan 18, 2018 11:08 am

I Norge er det kun Bauhaus som fører de tror jeg - http://www.intertechno.at/html/kontakt.html

Fikk en kjenning til å kjøpe 2stk for meg på Vestby.
______________________________
Mvh/ BR JoranG

MrXs
Posts: 12
Joined: Thu Jan 18, 2018 11:08 am

Re: Garageport styring

Post by MrXs » Thu Jan 18, 2018 11:08 am

Jag körde till Bauhaus pga att jag såg att ni köpt på Bauhaus.
Men Bauhaus Sverige har ej dem i sitt sortiment, jag ställde frågan och de sökte :-)
De sa att de skiljer i sortiment mellan länder på Bauhaus.
Hornbach i Sverige har dock hela deras sortiment.

T_ac_S
Posts: 5
Joined: Thu Jan 18, 2018 11:08 am

Re: Garageport styring

Post by T_ac_S » Thu Jan 18, 2018 11:08 am

cafs wrote:First of all, sorry for posting in English but I dont have a clue on Swedish, maybe moderator would prefer to move it into English > hardware but I post it here since it is and reply to previous message.
I have reach this post searching for rele. And it seems it give you instructions to achieve what I want.
I have a heater which gives you a two wire Input for a Thermostatic sensor, which a rele so after it reaches a desired temperature it closes the circuit and the heater start heating. Right now I use a Crono-Thermostatic to control it for diferent temperatures depending of the day, time of the day and so on ...

I would like also to have the chance to put in parallel a control so I can start heater no mater which day or temperature it is.
I had been looking and I only found things like that http://www.tme.eu/es/Document/797af8059 ... ual_en.pdf which I am afraid they don't seem to be compatible which tellstick yet (or ever).

From what I could understand after google translation of http://www.minhembio.com/Frater/180405/ You are modifying a LCMR-1000 to be able to do so, so instead of switching on/off of 230v input it will switch another signal going through the two wires you add.
The problem is that something might be missing in translation because I cannot see how you it avoid switching the original input. Would someone be so kind to do some translation into english so I can try to understand it and don't fire up my house :D

Regards
Hi! What it seem like this mod is doing, is actually to only use the relay as a switch, removing the live current (220V) from the circuit by removing the glass fuse and the thermal fuse, hence leaving the relay in "open air". Look at the picture of the relay, the black mark is the center of the relay (normally COM) and the red one is the NO (normaly open) connection.. (At least this is the way I understand the mod)

Regards from Norway :)

cafs
Posts: 9
Joined: Thu Jan 18, 2018 11:08 am

Re: Garageport styring

Post by cafs » Thu Jan 18, 2018 11:08 am

Thanks for the reply.

I found out from previous posts that intertechno Itl-1000 just fits my needs so I had purchase 2 of them.

I will use them instead of trying to do it myself (at least for that time)

petzno
Posts: 116
Joined: Thu Jan 18, 2018 11:08 am

Re: Garageport styring

Post by petzno » Thu Jan 18, 2018 11:08 am

Kan noen bekrefte at ITL-1000 fungerer med Tellstick Net?

MrXs
Posts: 12
Joined: Thu Jan 18, 2018 11:08 am

Re: Garageport styring

Post by MrXs » Thu Jan 18, 2018 11:08 am

petzno wrote:Kan noen bekrefte at ITL-1000 fungerer med Tellstick Net?
Den fungerar med Net, jag har ITL-1000 med en Tellstick Net.

Post Reply