Controlling Electric Shutters?

Moderator: Telldus

Post Reply
moryoav
Posts: 33
Joined: Fri Mar 17, 2023 9:45 am

Controlling Electric Shutters?

Post by moryoav »

Is there any Tellstick-controlled receiver that can control electric window shutters? It will require two states - up and down...?

Thanks!
mickelin
Posts: 107
Joined: Fri Mar 17, 2023 9:45 am

Post by mickelin »

You can use any On/Off switch for this. I use
http://www.nexa.se/LCMR1000Relamottagare.htm
for curtain and movie screen up/down control. You need two switches and a relay. (One switch for power on/off and one for up/down)

Great work on the MP plug-in by the way!
moryoav
Posts: 33
Joined: Fri Mar 17, 2023 9:45 am

Post by moryoav »

mickelin wrote:You can use any On/Off switch for this. I use
http://www.nexa.se/LCMR1000Relamottagare.htm
for curtain and movie screen up/down control. You need two switches and a relay. (One switch for power on/off and one for up/down)

Great work on the MP plug-in by the way!
Thanks! So with your technique I need two switches and a relay, but I also found this receiver:
http://www.coco-technology.com/manuals/SUN-500_EN.pdf

Which seems like a simpler solution, no? Will this device work with Tellstick?
micke.prag
Site Admin
Posts: 2243
Joined: Fri Mar 17, 2023 9:45 am
Location: Lund
Contact:

Post by micke.prag »

This will probably work with TellStick. We haven't tried it so I cannot say for sure.
Micke Prag
Software
Telldus Technologies
Jean-Julien
Posts: 34
Joined: Fri Mar 17, 2023 9:45 am

SUN 500

Post by Jean-Julien »

I tested switch SUN 500 to make function shutters.
Tellstick orders it without problem.
Knowing that it is necessary to send the same signal to start and stop, it should be regulated the programs so that they send only one order if not the shutter starts and stopped at once.
Cordially
Post Reply