Clas Ohlson energy meter support?

Moderator: Telldus

Post Reply
jkp
Posts: 42
Joined: Fri Mar 17, 2023 9:45 am

Clas Ohlson energy meter support?

Post by jkp »

Probably not supported with current firmware, but any educated guesses on complicatedness of adding the support for this? I have custom flashing env set up and might try.

Article 36-4500

http://www.clasohlson.com/fi/sv/Langato ... isoCode=sv&
jkp
Posts: 42
Joined: Fri Mar 17, 2023 9:45 am

Re: Clas Ohlson energy meter support?

Post by jkp »

Actually I would probably use the led-reading version, 36-5041, http://www.clasohlson.com/fi/Langaton-s ... isoCode=sv&
micke.prag
Site Admin
Posts: 2243
Joined: Fri Mar 17, 2023 9:45 am
Location: Lund
Contact:

Re: Clas Ohlson energy meter support?

Post by micke.prag »

Nothing complete yet but you might find some useful information here:
http://developer.telldus.com/ticket/106
Micke Prag
Software
Telldus Technologies
jorang
Posts: 259
Joined: Fri Mar 17, 2023 9:45 am
Location: Norway

Re: Clas Ohlson energy meter support?

Post by jorang »

micke.prag wrote:Nothing complete yet but you might find some useful information here:
http://developer.telldus.com/ticket/106
Just for curiosity - what is the "useful information" I should look for? That there has been no activity the last 11 mts..?
______________________________
Mvh/ BR JoranG
jkp
Posts: 42
Joined: Fri Mar 17, 2023 9:45 am

Re: Clas Ohlson energy meter support?

Post by jkp »

No, probably not that (though that may be useful too for someone looking for turnkey solutions). The useful information meant was behind the links, there's detailed documentation on protocols used by Efergy energy monitors. If the Clas Ohlson Efergy uses the same protocol, someone familiar in programming might be able to add support for the protocol.
jorang
Posts: 259
Joined: Fri Mar 17, 2023 9:45 am
Location: Norway

Re: Clas Ohlson energy meter support?

Post by jorang »

jkp wrote:No, probably not that (though that may be useful too for someone looking for turnkey solutions). The useful information meant was behind the links, there's detailed documentation on protocols used by Efergy energy monitors. If the Clas Ohlson Efergy uses the same protocol, someone familiar in programming might be able to add support for the protocol.
Thnx for clarifying :)
______________________________
Mvh/ BR JoranG
dannel
Posts: 11
Joined: Fri Mar 17, 2023 9:45 am

Re: Clas Ohlson energy meter support?

Post by dannel »

Will there be support for the Tellstick Net?
butterbox
Posts: 2
Joined: Fri Mar 17, 2023 9:45 am

Re: Clas Ohlson energy meter support?

Post by butterbox »

I also wonder. The referenced ticket in this thread hasn't moved for a long while.
If it comes, will it be necessary to update the firmware or will it be supported by Live and Tellduscenter (Duo) updates?
LeifGib
Posts: 2
Joined: Fri Mar 17, 2023 9:45 am

Re: Clas Ohlson energy meter support?

Post by LeifGib »

Has anybody tried the energy monitoring sensor 'Current Cost Mini Transmitter' that is using 433 MHz and can be bought seperately from amazon.com for £15
http://www.amazon.co.uk/Current-Cost-Mi ... escription
More specs at
http://www.smartnow.com.au/products/env ... ansmitter/
Post Reply