Clas Ohlson energy meter support?

Moderator: Telldus

Post Reply
jkp
Posts: 42
Joined: Thu Jan 18, 2018 11:08 am

Clas Ohlson energy meter support?

Post by jkp » Thu Jan 18, 2018 11:08 am

Probably not supported with current firmware, but any educated guesses on complicatedness of adding the support for this? I have custom flashing env set up and might try.

Article 36-4500

http://www.clasohlson.com/fi/sv/Langato ... isoCode=sv&

jkp
Posts: 42
Joined: Thu Jan 18, 2018 11:08 am

Re: Clas Ohlson energy meter support?

Post by jkp » Thu Jan 18, 2018 11:08 am

Actually I would probably use the led-reading version, 36-5041, http://www.clasohlson.com/fi/Langaton-s ... isoCode=sv&

micke.prag
Site Admin
Posts: 2242
Joined: Thu Jan 18, 2018 11:08 am
Location: Lund
Contact:

Re: Clas Ohlson energy meter support?

Post by micke.prag » Thu Jan 18, 2018 11:08 am

Nothing complete yet but you might find some useful information here:
http://developer.telldus.com/ticket/106
Micke Prag
Software
Telldus Technologies

jorang
Posts: 259
Joined: Thu Jan 18, 2018 11:08 am
Location: Norway

Re: Clas Ohlson energy meter support?

Post by jorang » Thu Jan 18, 2018 11:08 am

micke.prag wrote:Nothing complete yet but you might find some useful information here:
http://developer.telldus.com/ticket/106
Just for curiosity - what is the "useful information" I should look for? That there has been no activity the last 11 mts..?
______________________________
Mvh/ BR JoranG

jkp
Posts: 42
Joined: Thu Jan 18, 2018 11:08 am

Re: Clas Ohlson energy meter support?

Post by jkp » Thu Jan 18, 2018 11:08 am

No, probably not that (though that may be useful too for someone looking for turnkey solutions). The useful information meant was behind the links, there's detailed documentation on protocols used by Efergy energy monitors. If the Clas Ohlson Efergy uses the same protocol, someone familiar in programming might be able to add support for the protocol.

jorang
Posts: 259
Joined: Thu Jan 18, 2018 11:08 am
Location: Norway

Re: Clas Ohlson energy meter support?

Post by jorang » Thu Jan 18, 2018 11:08 am

jkp wrote:No, probably not that (though that may be useful too for someone looking for turnkey solutions). The useful information meant was behind the links, there's detailed documentation on protocols used by Efergy energy monitors. If the Clas Ohlson Efergy uses the same protocol, someone familiar in programming might be able to add support for the protocol.
Thnx for clarifying :)
______________________________
Mvh/ BR JoranG

dannel
Posts: 11
Joined: Thu Jan 18, 2018 11:08 am

Re: Clas Ohlson energy meter support?

Post by dannel » Thu Jan 18, 2018 11:08 am

Will there be support for the Tellstick Net?

butterbox
Posts: 2
Joined: Thu Jan 18, 2018 11:08 am

Re: Clas Ohlson energy meter support?

Post by butterbox » Thu Jan 18, 2018 11:08 am

I also wonder. The referenced ticket in this thread hasn't moved for a long while.
If it comes, will it be necessary to update the firmware or will it be supported by Live and Tellduscenter (Duo) updates?

LeifGib
Posts: 2
Joined: Thu Jan 18, 2018 11:08 am

Re: Clas Ohlson energy meter support?

Post by LeifGib » Thu Jan 18, 2018 11:08 am

Has anybody tried the energy monitoring sensor 'Current Cost Mini Transmitter' that is using 433 MHz and can be bought seperately from amazon.com for £15
http://www.amazon.co.uk/Current-Cost-Mi ... escription
More specs at
http://www.smartnow.com.au/products/env ... ansmitter/

Post Reply