HE105 support

Moderator: Telldus

Post Reply
angus
Posts: 4
Joined: Thu Jan 18, 2018 11:08 am

HE105 support

Post by angus » Thu Jan 18, 2018 11:08 am

sorry I am a newbie, however I have just ordered a tellstick, to try and control my central heating. I have ordered a homeeasy he105 central heating controller, however from what I can see its not supported by the tellstick... can someone please confirm if that is the case, or if I am missing something. I downloaded the tellstick software, but the HE105 (and ultimate range) dont seem to be there.

I would appreciate some help.

regards,
Angus

micke.prag
Site Admin
Posts: 2242
Joined: Thu Jan 18, 2018 11:08 am
Location: Lund
Contact:

Re: HE105 support

Post by micke.prag » Thu Jan 18, 2018 11:08 am

We have never tried this device. That is why it isn't included in TelldusCenter. Maybe you can configure it as a Selflearning On/Off?
Micke Prag
Software
Telldus Technologies

angus
Posts: 4
Joined: Thu Jan 18, 2018 11:08 am

Re: HE105 support

Post by angus » Thu Jan 18, 2018 11:08 am

Thanks for the reply however I have now cancelled by tellstick order as it looks like the he105 uses a different coding
Xpl mentions it here
http://www.xplmonkey.com/homeeasy.html

Would be great if the tellstick would work but didn't want to buy just in case, but the he105 and tellstick would offer a cost effective way of remotely controlling your heating.

Thanks
Angus

angus
Posts: 4
Joined: Thu Jan 18, 2018 11:08 am

Re: HE105 support

Post by angus » Thu Jan 18, 2018 11:08 am

I have found someone else looking at the same problem. He said that he has the "pronto" codes for the HE105, would that help in adding it to the tellstick application? I am feeling like buying the tellstick and then testing this out... I was planning on writing it up, as looking around, and speaking to friends, a nice easy way to advance your heating seems popular.

http://forum.homeeasy.eu/viewtopic.php? ... 5809#p5809

I suppose the other option is to use some other simple relay that can be controlled by the tellstick, can you advice one? Its for UK.

thanks
Angus

eddcole
Posts: 7
Joined: Thu Jan 18, 2018 11:08 am

Re: HE105 support

Post by eddcole » Thu Jan 18, 2018 11:08 am

Hi there

Sorry for the delay, here are the pronto codes for address 5

Heating Address: 5 On
0000 0068 0000 000D 001E 001F 003B 001F 003B 003B 001D 001F 003B 001F 003B 003B 001D 001F 003B 001F 003B 003B 001D 003B 001D 001F 003B 003B 001E 03BD
Heating Address: 5 Off
0000 0068 0000 000D 001E 001F 003B 001F 003B 003B 001D 001F 003B 001F 003B 003B 001D 001F 003B 001F 003B 003B 001D 001F 003B 003B 001D 003B 001E 03BD

Hope something can be don from this

Edd

angus
Posts: 4
Joined: Thu Jan 18, 2018 11:08 am

Re: HE105 support

Post by angus » Thu Jan 18, 2018 11:08 am

I'm losing the will now... however, on reflection, I cant actually see what the HE105 now gives me, except greif, if all I want to do is control the heating remotely (i.e. I never intend using the SMS unit or big Homeeasy remote control).

Is there a reason I cant just use the HE304 as a switch, I was intending putting it in parallel to my existing heating controller to allow me to bypass, but that way I could easily add the device to the tellstick and use all their controlling methods. Only thing missing would be a couple of LEDs, showing whether its on or not...

The HE304 says its rated to 5A.... I feel a project coming on, and a possible write up to post :-) Maybe I will buy my tellstick after all.

Angus

Post Reply