My forum

Or just buy a cheap relay from ebay:

http://tellstick-net.wikia.com/wiki/NON ... ff_etc..)#

or use this relayboard from ebay:

http://tellstick-net.wikia.com/wiki/NON ... ff_etc..)#

or this one:

http://tellstick-net.wikia.com/wiki/NON ... ff_etc..)#

Yeah, maybe they are using some switches or maybe its just noise in your area on the 433 band, but if its constant pulses, then my guess is its some kind of sensor in your area, everything else dosent seem as likely. the tellstick net flashes blue if it lost connection with teldus live, but thats on...

Depends on your opener, but normally you want to connect NO (connects by closing contact). And the other wire to? to current, aka C. http://i.stack.imgur.com/Vfzvx.png Remember most garageports will only function with a momentary switch, but try until you find something which is working with your s...

Just received the motion sensor today and it is working perfectly just like the magnetic switch. It is the same micro controller aka same jumper settings... http://s15.postimg.org/v7fshd9jr/20140307_164241.jpg The abowe jumper setting creates a waveman remote, with unit code H1 Check wiki for ebay s...

And the smaller has 1.5M 3.3M or 4.7M Does anyone know the meaning of this? Best regards About the 1.5, 3.3 and 4.7 jumper setting i found this from the website you are linking to: Then I moved the jumper marked: 1.5, 3.3, 4.7. This jumpers have inpact on the baud rate (bits pr second). This is the...

Okay, now we just have to figure out what it means in practical terms. :) Haha yeah. So far my tellstick has been unable to pick up 4.7M, but both 1.5M and 3.3M have been working. Running my magnetic switches and motion sensor on 3.3M atm and have no comnection problems. The magnetic switch reaches...

The way i went about this is: First i created a event on telldus live which goes to a URL from Autoremote (Tasker plugin) When autoremote sees that someone (telldus) have accesed the url, it then in tells tasker that it got activated. In tasker i have a profile which reacts on a Autoremote event wit...

Hi. I have been using tasker for quite some time, but have never been forced to use variables before (allways found a way around it), but now i really need to use it. I would like to create a widget with information (zooper widget) about when the motion sensor was triggered last time, and the same w...

LarsChr wrote:Thanks, great, I will look in to it during the weekend

Sweet Have fun

Hi, Is there any reason why this set up should not work? 1. Live telldus - event turns switch back on after turned off 2. Create a profile in tasker In which is activated when state of given switch is set to 2 (on) I have'nt tried it, since i was afraid that it would turn the sensor back On, before...

Maximum atm is 3 relays on one board, from what i know.

Alright now i have added all the sensors to the events, so they will turn on again directly from telldus. One problem is that if the sensor gets activated again before the timeout delay, then the sensor wont turn on again, so either we have to set the delay to 1 sec, or have a backup trigger in task...

Updated wiki with sartano stock availability..